Results 1 to 16 of 16
Thread: condencer piping ?
-
21-04-2010, 10:29 AM #1
condencer piping ?
form load callculation the size of condenser should be 4.2 ton. now the problem is how can i sellect the piping size and fins size of the condenser.
waht i do for sizing.
1 what should be the size of pipe
2 fins size?
3 depth
4 and air circulation.
-
21-04-2010, 11:21 AM #2
-
21-04-2010, 11:22 PM #3
Re: condencer piping ?
Or ask a manufacturer to make one for you.
Brian - Newton Abbot, Devon, UK
Retired March 2015
-
22-04-2010, 09:48 AM #4
Re: condencer piping ?
i am using r-502. what is other data which you need
-
22-04-2010, 10:39 AM #5
Re: condencer piping ?
Fill the appropriate blanks and I will select it for you.
-
23-04-2010, 01:42 AM #6
Re: condencer piping ?
Hi 3xN,
Can you share this software with us, if you can mate??
regardsBR
-
23-04-2010, 07:12 AM #7
Re: condencer piping ?
I'm afraid I can't.
-
23-04-2010, 03:45 PM #8
Re: condencer piping ?
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.
-
24-04-2010, 12:28 AM #9
-
27-04-2010, 01:01 PM #10
Re: condencer piping ?
the refg is r502. and the achiving themprature is -30C.
-
28-04-2010, 06:21 AM #11
Re: condencer piping ?
Here we go Pakistan is still using R502, totally banned world wide, decades ago.
The planet has no chance if there are rules for some and not for some "emerging nations ". what a load of garbage.
-
28-04-2010, 09:55 AM #12
Re: condencer piping ?
Despite, I still don't have the data I asked for sizing the condenser. These guys ask for help, and then don't mind substantiating.
-
28-04-2010, 07:08 PM #13
-
29-04-2010, 10:31 AM #14
Re: condencer piping ?
No, it isn't
-
29-04-2010, 11:43 AM #15
Re: condencer piping ?
the file you have send is not working. send me the address of the said softwar.
-
30-04-2010, 07:33 AM #16
Re: condencer piping ?
Moderator, please stick this thread. It's amusing.
Mianrizwan, you must be challenged somehow.... I didn't post a software file. That was an image.
I asked you the relevant data for the blanks you could see in the image.
I think you shouldn't be allowed to design a refrigeration system in your condition.
Similar Threads
-
Relief piping iced up
By NH3ISFORME in forum NH3Replies: 10Last Post: 21-09-2009, 01:56 AM -
Piping labels
By duke717 in forum NH3Replies: 2Last Post: 29-04-2009, 02:57 AM -
cooling water piping system
By 2007eng in forum Air ConditioningReplies: 3Last Post: 19-04-2009, 12:08 PM -
It is good piping design ?
By oilzee in forum Trouble ShootingReplies: 6Last Post: 13-10-2008, 06:34 AM -
Q: Piping installation for Split Types
By brianubaldo in forum RefrigerantsReplies: 11Last Post: 30-04-2008, 02:23 PM