Results 1 to 4 of 4
Thread: ice factory heatload calculation
-
13-04-2010, 03:24 PM #1
ice factory heatload calculation
Dear Members,
please suggest me the steps for calculating the heat load of a ice factory
-
13-04-2010, 11:44 PM #2
Re: ice factory heatload calculation
Study refrigeration, study heat load calculation.
Brian - Newton Abbot, Devon, UK
Retired March 2015
-
14-04-2010, 10:49 AM #3
Re: ice factory heatload calculation
Hi, Ahmed Mansuri
welcome to RE forums ...
sorry, but those few steps are not enough to teach you how to do that job properly ..
please, search RE forums for links to some literature ... download it and then start to read it ... maybe you can find some answers soon
then if you are in doubt, please, revert to us...
Best regards, Josip
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.
-
07-06-2010, 02:33 PM #4
Re: ice factory heatload calculation
hi mr ahmed,
Kindly tell me what type of ice is to be formed (block,cube,tube,plate or flake ),at what ambient,and with which system of condensation (air or water) cooled,details of premises where the unit is to be installedLast edited by Brian_UK; 07-06-2010 at 11:24 PM.
Similar Threads
-
Water Flow in evaporator exceeds the factory rating, what will happen?
By aryramadhan in forum FundamentalsReplies: 7Last Post: 07-02-2010, 10:33 AM -
NH3 thermosiphon evaporator calculation
By cygbob in forum NH3Replies: 3Last Post: 27-11-2007, 11:00 AM -
factory A/C too small
By Sledge in forum CommercialReplies: 7Last Post: 26-05-2007, 12:46 AM -
New Israeli factory in Wales
By chemi-cool in forum New TechnologiesReplies: 1Last Post: 11-01-2005, 12:07 AM -
Load Calculation / Comaprison
By herefishy in forum Technical SpeculationsReplies: 11Last Post: 04-03-2002, 10:21 PM