Results 1 to 6 of 6
Thread: Stal Mini screws
-
06-04-2010, 02:10 AM #1
Stal Mini screws
Looking for capacity information on Stal S24 and a R59, both on R22, at -30'C/ +35'C. 2 pole motors 50Hz.
Magoo
-
06-04-2010, 07:51 PM #2
Re: Stal Mini screws
ring the friendly staff at Johnson Controls 09 444 6434 I'm sure they will be able to help
-
06-04-2010, 10:09 PM #3
Re: Stal Mini screws
Sorry I cannot be more Helpful.
All I have is this small page of Technical Info on the S24.
See attached Page.
Grizzly
-
07-04-2010, 10:53 AM #4
Re: Stal Mini screws
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.
-
10-05-2010, 12:04 PM #5
Re: Stal Mini screws
Magoo, had you find what you were looking for? If not , I might be able to help you....
-
29-06-2010, 09:38 AM #6
Re: Stal Mini screws
Hey am looking for some info on the stal s24, does anyone know what "low pressure ratio" is calculating! Having alarm issues.
Similar Threads
-
Are Copeland screws any good?
By garyb in forum CommercialReplies: 13Last Post: 08-06-2010, 06:47 AM -
Mini split system heating, but not cooling well.
By tirider in forum Heat PumpsReplies: 7Last Post: 06-11-2009, 09:17 PM -
Stal S26 manuals or advice please
By riksly in forum Ye Old Wifes TalesReplies: 7Last Post: 20-02-2009, 08:44 AM -
Stal discharge check rattle mystery
By Howeirdhughs in forum Trouble ShootingReplies: 5Last Post: 16-12-2008, 08:21 AM -
Stal Problems
By NH3LVR in forum Industrial CompressorsReplies: 2Last Post: 16-09-2006, 11:08 AM