Results 1 to 9 of 9
Thread: Drier Position
Threaded View
-
26-06-2001, 12:14 AM #4Originally posted by subzero*psia
This probably sounds like a smart crack... but .... if you have room to install this added "bulge" type receiver, why not just put the drier on its side with a slope to it
I am not sure I described it well, did that make sense? Yes perfect description, I know when I'm being told off! I would understand it on a cellphone with the van window open at 55, LOLBrian - Newton Abbot, Devon, UK
Retired March 2015
Similar Threads
-
Drier then site glass why?
By Andy T in forum CommercialReplies: 7Last Post: 15-09-2006, 09:59 PM -
Drier
By Vincent Yu in forum FundamentalsReplies: 6Last Post: 07-02-2006, 03:02 AM -
drier dessicant decomposing
By Joe Youmans in forum Trouble ShootingReplies: 0Last Post: 18-08-2005, 03:34 PM -
Equalizer's Position
By ben chaib in forum Technical DiscussionsReplies: 9Last Post: 06-04-2002, 04:49 PM -
Shelf life of an uncapped dessicant drier.
By eberg in forum Air ConditioningReplies: 2Last Post: 22-08-2001, 01:22 PM