YORK Rotary Screw Compressor

[xelazman]

Dear friends of RE,

Is there anyone can tell me that YORK Rotary Screw Compressor can overhaul?

I have one compressor, we disassembled it and found bearings were worn out.
DETAILS: YORK ROTARY SCREW
Compressor Model: YCCG- 193S-0210-YC

Anyone has a SERVICE MANUAL to teardown and assemble compressor?

I got the part manuals, but only shaft seal and potentiometer assembly are available.

I am very grateful to receive any comment from you guys. Thanks

xelazman

[St.John@SSIRT]

xelazman,
Does the tag on compresser give the date of production? I rebuild Fricks all the time and this York may have been built at the Frick factory. If so I will have what you need.

David

[serviceman]

st. john
you can help me with a copy of service manual compressor YCCH193L0546YB the year of manufacture of the unit is 1995

[xelazman]

Hi St.John,

The date of production was 1996, can you help me for Service Manual, Teardown instruction?

xelazman

[xelazman]

Hi St.John,

Here's my email address:
xela4682002@yahoo.com

Thanks once again.

xelazman

[alan wolf]

Hi St John

Would like a teardown manual also for frick/york screw

been frick factory back in early 90s but did not get any manuals.

Regards
AWW

[hx_2009]

hi st.john,

This is my email address:

lhbzhy2008@163.com

TKS a lot!

[nrian larson]

Please contakt Johnson Controls in Denmark, they have a workshop who repair all screwcomp. or contakt your nearest johnson controls .....this YCCG is made in Denmark :-)originally

Brian