Results 1 to 3 of 3
Thread: Cryocooler
-
26-02-2005, 05:31 PM #1
Moderator
Site Moderator : and general nice guy
- Join Date
- Oct 2003
- Location
- Belgium
- Age
- 62
- Posts
- 5,630
- Rep Power
- 34
Cryocooler
Can someone explain the schematic on
http://www.copeland-corp.com/cp_rf/i...pec_Sheet1.pdf
of a cryocooler on Helium.
What are the 3 bottles (HE or 2 oil separators?) on the right side and what is the absorber?
Someone ever installed these compressors?
Seems a very easy solution or replacement for an autocascade system.Last edited by Peter_1; 26-02-2005 at 05:33 PM.
It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.
-
26-02-2005, 11:01 PM #2
Moderator
I am starting to push the Mods: of RE Site Moderator : and general nice guy
- Join Date
- Mar 2001
- Location
- Dorset
- Age
- 76
- Posts
- 11,025
- Rep Power
- 60
Re: Cryocooler
Two of the bottles are oil separators, if you follow the oil return line from the compressor it connects with them.
The third one, the absorber, has me beat. Is it another word/term for a filter/drier ? I'm not sure....does helium do anything funny when compressed and heated ?Brian - Newton Abbot, Devon, UK
Retired March 2015
-
28-02-2005, 05:52 AM #3
Registered User
Hey, I am new to : RE
- Join Date
- Feb 2005
- Location
- USA
- Age
- 59
- Posts
- 8
- Rep Power
- 0
Re: Cryocooler
Perhaps the Absorber is defined as to absorb or muffle sound. Ive found them on larger systems for that purpose. Then again I could be wrong.
