Results 1 to 4 of 4
Thread: help with ansi standard
-
25-03-2010, 12:23 PM #1
help with ansi standard
I'm looking for the industrial standard for ammonia piping colors that are to be painted on my system I have Orange-High pressure gas, Orange/red- High pressure liquid, Red- relief, Blue-low temp liquid, is this right?
-
25-03-2010, 04:39 PM #2
Re: help with ansi standard
jf Here in B.C. all NH3 piping and pressure vessels are painted yellow.This comes from the Canadian General Standards Board Which states that all Hazardous materials colour isYellow . Low Hazard materials colour is Green Fire Protection colour is Red. I have also been looking for an industrial standard and have had no success in finding one. C.D.
NH3 for me
-
25-03-2010, 07:57 PM #3
Re: help with ansi standard
Hi You can get them free from here
http://www.pipelabels.com/pipe-marking-chart.php
Also click on images on this one
http://www.seton.com/pipe-markers-va...uid-m9201.htmlLast edited by Toosh; 25-03-2010 at 08:15 PM. Reason: Addition
My wife used to say you never listen to a word I say at least I think that what she said
-
25-05-2011, 06:34 AM #4
nice informatio
really nice information, thanks for posting.
[Advert removed]Last edited by Brian_UK; 25-05-2011 at 09:58 PM. Reason: Unpaid for advert removed.
Similar Threads
-
MICROPROCESSOR DIAGNOSTICS/Differnces beteween TK/CTC
By REEFER-TEK in forum TransportReplies: 12Last Post: 27-03-2011, 04:12 AM -
Minisplit Inverter communication standard
By cadillackid in forum New TechnologiesReplies: 32Last Post: 16-12-2010, 05:24 AM -
subcooling and superheat are standard measurement or not?
By karl2009 in forum Technical DiscussionsReplies: 3Last Post: 10-01-2009, 11:39 PM -
EN 378 revision
By Argus in forum Legal-Business-MarketingReplies: 19Last Post: 19-11-2008, 07:21 PM