Results 1 to 3 of 3
Thread: Maniticowoc ice machine troubles
-
12-03-2010, 04:07 PM #1
Maniticowoc ice machine troubles
hello all,
Model #QD045A
Problem: Compressor will not come on.
Seems all coponents are working.
The compressor will only come on when the contacter is manual energized. and will stop if let up.
Cannot get voltage to coil for contactor.
What is the voltage at the coil AC or DC?
Which relay is the coil relay on the board?
HELP
-
13-03-2010, 02:53 PM #2
Re: Maniticowoc ice machine troubles
coil voltage is AC, start tracing your wires, check curtain switch, open and close the curtain, you should see the led light go on and off on the board, if you remove the curtain you can use a magnet to put over the switch, maybe your magnet just felt inside the bin, shold be located on the right bottom side of curtain,
Last edited by Royal241; 13-03-2010 at 03:02 PM.
-
13-03-2010, 07:06 PM #3
Re: Maniticowoc ice machine troubles
as royal says.I had this last week myself.The white curtain at the front of the evap{it does come off} should have a magnet at the bottem right hand corner on the inside.They do come off,and stops the machine working.Best thing to do is to check,and to ring technical at manitwoc,and explain what is happening.they are very helpfull.
Similar Threads
-
Ice Block Machine: Hoping to start an Ice Factory. Please Help!!
By promise1 in forum CommercialReplies: 15Last Post: 02-01-2011, 01:26 AM -
Manitowoc Ice Machine
By crazycohiba in forum CommercialReplies: 3Last Post: 27-08-2009, 05:19 AM -
elmeco slushy machine
By Temprite in forum CommercialReplies: 1Last Post: 14-09-2008, 08:58 AM -
Ice machine troubles
By bfarmer in forum Trouble ShootingReplies: 18Last Post: 10-01-2007, 09:12 PM -
Cattabriga Ice Cream Machine
By Abe in forum Trouble ShootingReplies: 9Last Post: 26-04-2003, 01:06 PM