Results 1 to 4 of 4
Thread: Design Software Suggestions
-
11-03-2010, 04:19 PM #1
Design Software Suggestions
Hi folks!
I'm new to this site and just now registered. I've been out of refrigeration design for almost 10 years and have an opportunity to get back into it. I've done system testing since that time, but not at the design level. Back when I was doing it, I used a program called R&R Supply and liked it. I have their old number and called them only to find it disconnected. Does anyone know what happened to them? Are they gone or bought out? Hopefully not gone because they had a fine program that served me well. What else is out there that is widely used for compressor based systems that can simulate evaporators and condensers? I don't necessarily trust freeware and shareware stuff out there since I don't know what I'm getting or how accurate. Any suggestions or leads to R&R Supply would be great.
-
11-03-2010, 07:32 PM #2
Re: Design Software Suggestions
Not fully sure of what you want out of the software but have you tried CoolPack, it is free but is very well respected.
http://www.et.web.mek.dtu.dk/Coolpack/UK/index.html
Also, welcome to the forum.Brian - Newton Abbot, Devon, UK
Retired March 2015
-
11-03-2010, 07:53 PM #3
Re: Design Software Suggestions
Hi, carddfann
Welcome to RE forums ...
please try this link...
http://www.danfoss.com/United_Kingdo...ning/Software/
each software is good ... check DIRCalc
searching RE forums for sure you can find links to some other software maybe useful for you...
Best regards, Josip
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.
-
11-03-2010, 08:25 PM #4
- Join Date
- Sep 2007
- Location
- Split Croatia
- Age
- 57
- Posts
- 6,151
- Blog Entries
- 6
- Rep Power
- 36
Re: Design Software Suggestions
Similar Threads
-
HVAC piping design software
By NoNickName in forum FundamentalsReplies: 26Last Post: 06-02-2010, 06:29 AM -
Network pipe design, calculation and drawing software
By wickedgxg in forum Tools and CalculatorsReplies: 4Last Post: 17-02-2009, 09:16 PM -
AC Design (Heat Load) Software
By Paul2uall in forum Tools and CalculatorsReplies: 13Last Post: 10-11-2008, 10:32 AM -
A/C Design Software
By ronaldo9 in forum Air ConditioningReplies: 7Last Post: 21-09-2008, 07:51 PM