Refrigeration for Fishing Ships

[jepoy_02]

Hi everyone,


Does anyone have any guidelines for refrigeration systems for fishing ships? I need to design one that has a brine freezer and a couple of storage rooms, but I am not sure about the considerations needed for this.

Appreciate all your help!

Lawrence

[Toosh]

Hi everyone,


Does anyone have any guidelines for refrigeration systems for fishing ships? I need to design one that has a brine freezer and a couple of storage rooms, but I am not sure about the considerations needed for this.

Appreciate all your help!

Lawrence

Hi Lawrence, have a look at this

http://www.matsu.alaska.edu/document...oat_Refrig.pdf

Toosh

[jepoy_02]

Hi Toosh,

Thanks for the reply. Although I need to find actual design procedures for to calculate for the components required.

Appreciate the help!

Lawrence

[D.D.KORANNE]

Specify design parameters .
You will need
a) see water cooled condenser
b) compressor which can be used on marine application , due consideration for constant rolling-pitching action
c) electrical system which is suitable for marine weather
d) refrigeration piping should be preferably elect welded / gas welded ; avoid threaded joints .
E) water cooled condenser to be with cupro-nickel (70:30)
f) paint : Marine grade

details can be worked out after load conditions are finalized .
Give further details .

[charlie n]

BIG suction traps.