Results 1 to 4 of 4
-
17-02-2010, 03:24 AM #1
Mycom Compressors - Metric or SAE
My company has just recently started work on ammonia systems, specifically hockey rink ice systems. All the rinks we have are running mycom 8 cylinder compressors . Having mostly done commercial work only, i want to get a larger socket set (3/4 or 1 inch drive) and was wondering what sizes are required with mycoms? I know most of the work i do is in SAE but seeing as mycom is a japanese company, are they using metric parts on these compressors? It is very easy for me to get an SAE-only set, but i will have to order one in if i need to get a metric only, or combined metric/sae set.
any help would be great
-
17-02-2010, 12:53 PM #2
Re: Mycom Compressors - Metric or SAE
Metric bolts are used on all compressors manufactured after April 1979.
-
18-02-2010, 10:59 AM #3
Re: Mycom Compressors - Metric or SAE
The only large socket needed for a mycom recip would be the flywheel .
I would suggest 3/4" drive set to do job if you were to buy anything .
-
20-02-2010, 02:45 AM #4
Re: Mycom Compressors - Metric or SAE
Bolts are metric, fittings BSPt
Similar Threads
-
Mycom relief valve issue?
By Mojjee in forum IndustrialReplies: 32Last Post: 15-05-2009, 03:26 AM -
Compressors - screw or reciprocating?
By Josip in forum Industrial CompressorsReplies: 18Last Post: 27-01-2009, 10:36 PM -
FES screw compressors
By negmy13 in forum Technical SpeculationsReplies: 0Last Post: 08-08-2008, 07:40 AM -
Do we have some expert in replacing compressors
By Zahid in forum Air ConditioningReplies: 2Last Post: 01-07-2008, 07:59 AM