Results 1 to 2 of 2
  1. 05-02-2005, 11:19 AM #1
    jan behnke's Avatar
    jan behnke
    jan behnke is offline regular poster
    Join Date
    Apr 2004
    Location
    UK sunny North Devon
    Age
    65
    Posts
    46
    Rep Power
    0

    Vapac FMD101 boilers



    Can any one tell me if there is a easier way of fitting a new vapac boiler with the drain fitting on the side I always have to use about half a tube of silicon to stop the water leaks and most times have to change the drain pump at the same time due to leaks, it all relies on poxy o rings, it some times takes me up to 2 hrs to change one.


  2. 05-02-2005, 10:52 PM #2
    Brian_UK's Avatar
    Brian_UK
    Brian_UK is offline Moderator I am starting to push the Mods: of RE Site Moderator : and general nice guy
    Join Date
    Mar 2001
    Location
    Dorset
    Age
    76
    Posts
    11,025
    Rep Power
    60

    Re: Vapac FMD101 boilers

    No, I've always found the O rings pretty good as long as the housing are in good condition.

    I would suggest getting new fittings, drain outlet etc, and trying again.
    Brian - Newton Abbot, Devon, UK
    Retired March 2015
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules