Results 1 to 6 of 6
Thread: Howden WRV 204/165
-
15-02-2010, 09:56 PM #1
Howden WRV 204/165
Hi guys
Does anyone have the dimensions for the bearing running surfaces and the labrinth seal running surface for the male rotor for a Howden WRV 204/165 compressor.
Thanks
C Ice
-
16-02-2010, 01:22 AM #2
Re: Howden WRV 204/165
Hi C Ice
I have a Howden manual I can send you.
Send me a PM with your email address and I will send. I also have the drawings but not on the computer but I can check the sizes and let you know.
Regards
Paul
-
30-08-2010, 03:10 AM #3
Re: Howden WRV 204/165
Hello, I work with compressors Howden WRV 204 here in Brazil but also do not have the manual nor the design of the compressor is always someone to send me information and contacts slay sobfre compressor parafuso.grato
-
23-12-2010, 11:23 PM #4
Re: Howden WRV 204/165
diegopfran2@yahoo.com.br e-mail por favor me enviem desenhos explodido com vistas do conjunto compressor howden
-
24-12-2010, 01:36 PM #5
-
19-01-2011, 03:26 AM #6
Re: Howden WRV 204/165
Hi PaulZ - do you have an emailable copy of the Howden manual?? If so could you please send a copy to davejw@vodafone.co.nz
Thanks in adavance.
Similar Threads
-
Howden balance piston/sleeves
By RANGER1 in forum Industrial CompressorsReplies: 7Last Post: 22-05-2010, 10:58 AM -
Howden H&HP Screw Compressors
By Josip in forum Industrial CompressorsReplies: 15Last Post: 21-11-2009, 02:36 PM -
Manual Vi setting for Howden WRVi255
By desaipt2003 in forum Industrial CompressorsReplies: 13Last Post: 04-08-2009, 11:47 AM -
Howden WCV255 & WRV255 Interchangeability
By desaipt2003 in forum Industrial CompressorsReplies: 6Last Post: 09-06-2009, 02:22 AM -
Howden compressor questions
By cygbob in forum Industrial CompressorsReplies: 10Last Post: 21-03-2009, 11:40 AM