Results 1 to 9 of 9
Thread: 50kg Blast Chiller
Hybrid View
-
03-02-2005, 02:04 PM #1
50kg Blast Chiller
Can anyone recommend a 50kg blast chiller please?
Fosters and Williams prices are above budget, and i don't know of any other makes in this size.
Any pointers would be appreciated.
Cheers
Eggs
-
03-02-2005, 07:44 PM #2
Re: 50kg Blast Chiller
Why not make one yourselves in PU panels, like found on www.isobar.be , mount a big evaporator in it and a compressor. Eliwell, Dixell, Carel have special controllers for this.
It will cost you a lot less then pre-made units.
PS, 50 kg blast chiller, what entering temperature has the product, cooling time and desired end temperature?It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.
-
03-02-2005, 07:51 PM #3
Re: 50kg Blast Chiller
Good idea Peter.
I like your attitude.
Also, if you use a speed contoller for the conveing belt, out temp of the product can be controlled.
Chemi
-
03-02-2005, 09:12 PM #4
Re: 50kg Blast Chiller
Thanks for the replys chaps, but this too adventurous for me. I just want a low priced, off the shelf cabinet like this:
-
03-02-2005, 09:25 PM #5
Re: 50kg Blast Chiller
ooops!
Try again.
Cheers
eggs
-
04-02-2005, 06:38 AM #6
Re: 50kg Blast Chiller
Zanussi do a range
http://www.zanussiprofessional.com/c...nglish&ua=MSIE
they tend to be priced slightly lower
dealers
http://www.zanussiprofessional.com/c...er_locator.jsp
cheers
richard
Similar Threads
-
Dunham Bush Chiller Alarm
By Regulator in forum Air ConditioningReplies: 11Last Post: 08-12-2010, 01:42 AM -
DIY aquarium chiller
By BarraCuda in forum Technical DiscussionsReplies: 18Last Post: 06-10-2010, 11:02 PM -
York Screw Chiller How low will it go?????
By bruceboldy in forum Industrial CompressorsReplies: 11Last Post: 10-08-2007, 10:29 PM -
Chiller fault
By iceman007 in forum Trouble ShootingReplies: 9Last Post: 27-06-2006, 06:15 AM -
closed loop chiller
By bender in forum Trouble ShootingReplies: 8Last Post: 02-01-2003, 01:32 PM