Results 1 to 2 of 2
-
20-01-2010, 12:59 AM #1
Bacnet to Trend IQ3 set up using Mitsubishi Heavy Industries VRF Systems
Can any one out there help me with a problem I have with Bacnet and Trend IQ3.
When the Bacnet is not connected to the Trend and running through a central controller all the systems work fine.
Reconnect the Bacnet box back to the Trend IQ3 front end and the Trend loses controll of the installed fan coils.
Have checked the systems amd they are talking to the Bacnet but the problem seems that the Trend wont run with the Bacnet.
Has any one got any ideas????
-
07-03-2010, 01:09 PM #2
Re: Bacnet to Trend IQ3 set up using Mitsubishi Heavy Industries VRF Systems
Hi
Is the IQ3Xcite Bacnet enabled?
Similar Threads
-
mitsubishi heavy industries fault
By skeggyboy in forum Air ConditioningReplies: 3Last Post: 20-08-2009, 06:41 PM -
Mitsubishi Heavy Industries head unit FDTJ90SHKXE2 nosiy operation
By aeaves in forum Air ConditioningReplies: 1Last Post: 21-04-2009, 01:49 PM -
Mitsubishi Heavy Industries FDC2501 tech advice required
By aeaves in forum Air ConditioningReplies: 1Last Post: 20-04-2009, 08:44 AM -
Mitsubishi Heavy Industries
By Freecool in forum Air ConditioningReplies: 6Last Post: 17-08-2007, 03:20 PM -
MITSUBISHI Heavy Industries
By coolit24 in forum Air ConditioningReplies: 8Last Post: 06-03-2006, 09:46 AM