Results 1 to 2 of 2
Thread: burnout driers
-
11-01-2010, 09:01 PM #1
burnout driers
in my experience it seems there are two schools of thought when choosing the correct size of burnout drier for a system.one being that the b/out drier should be one size up from the suction line.the other being that the drier connection need only be the same as the suction line.which is,and preferably backed up with an explanation, correect?
when i say next size up, i mean in capacity aswell.
-
11-01-2010, 11:17 PM #2
Re: burnout driers
Sporlan have their ideas in this document, go up a size or early replacement, etc.
http://sporlan.jandrewschoen.com/80-10.pdf
Also, pick one of these...
http://sporlan.jandrewschoen.com/catchalls.shtmBrian - Newton Abbot, Devon, UK
Retired March 2015
Similar Threads
-
Suction line driers
By bernier74 in forum Trouble ShootingReplies: 10Last Post: 19-11-2009, 11:08 AM -
Driers on split system pipes
By R1976 in forum Air ConditioningReplies: 8Last Post: 16-09-2009, 08:01 PM -
Driers???
By daddymac in forum Air ConditioningReplies: 3Last Post: 08-10-2007, 04:44 PM -
Driers blocking on Cornelius bottle cabinets
By phil68 in forum Trouble ShootingReplies: 3Last Post: 29-12-2005, 09:21 PM -
Oil recovery after burnout.
By Arkma in forum Trouble ShootingReplies: 0Last Post: 02-09-2005, 05:49 PM