Results 1 to 4 of 4

Thread: foaming

  1. #1
    Join Date
    Mar 2006
    Location
    belfast
    Posts
    239
    Rep Power
    19

    Question foaming



    Before christmas we added blue glycol (glycol with rust inhibitor) to a free cooler.

    problem is that when the system gets load the water starts foaming.
    we have never seen this before but we have never used this kind of glycol before

    anyone ever seen or had this problem before ??

    i was thinking of adding a defoaming solution but also un sure if this then would effect the glycol protection ??

    the glycol was supplied onsite so cannont ask our usal supplier as they dont sell this product



  2. #2
    Brian_UK's Avatar
    Brian_UK is offline Moderator I am starting to push the Mods: of RE Site Moderator : and general nice guy
    Join Date
    Mar 2001
    Location
    Dorset
    Age
    76
    Posts
    11,025
    Rep Power
    60

    Re: foaming

    Yep, use the defoamer, designed for the job so you should be OK.
    Brian - Newton Abbot, Devon, UK
    Retired March 2015

  3. #3
    Join Date
    Mar 2006
    Location
    belfast
    Posts
    239
    Rep Power
    19

    Re: foaming

    thanks for the reply brian. been flat out so havent been back at this job will let u no how i get on

  4. #4
    Brian_UK's Avatar
    Brian_UK is offline Moderator I am starting to push the Mods: of RE Site Moderator : and general nice guy
    Join Date
    Mar 2001
    Location
    Dorset
    Age
    76
    Posts
    11,025
    Rep Power
    60

    Re: foaming

    Used to use it with the dear old Robur gas fired chillers which had open secondaries.
    Brian - Newton Abbot, Devon, UK
    Retired March 2015

Similar Threads

  1. Excessive oil foaming
    By mohamed khamis in forum Trouble Shooting
    Replies: 20
    Last Post: 27-09-2008, 02:22 AM
  2. Foaming Oil
    By Futsal1st in forum Trouble Shooting
    Replies: 29
    Last Post: 29-02-2008, 04:08 PM
  3. Frothy Oil.!!!
    By N.Lewis in forum Air Conditioning
    Replies: 17
    Last Post: 10-12-2007, 09:43 PM
  4. Liquid ammonia injection for cooling.
    By mrsparky in forum Industrial
    Replies: 91
    Last Post: 19-04-2007, 09:44 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •