Results 1 to 5 of 5
-
01-01-2010, 06:07 PM #1
Tecumseh HGC 1000 oil specification
I need to know what oil my compressor takes.
I have a Tecumseh HGC 1000 compressor, belt driven from a marine diesel, 12 V, used in a fridge/freezer refrigeration system on a boat. Cooling in condenser is via seawater; there is also a Parker liquid line filter dryer model 082. The compressor must be 40 years old, has been regularly serviced and is in good working order. The previous owner said it was set up with refrigerant R413a in 2004. System hasn’t been in use for a few years, that’s why I have had the compressor serviced.
After the service in the UK, engineer said he wasn’t sure what oil I wanted in it. Well I don’t have a clue! Tecumseh Products Company said they passed this line on to Blissfield 30 years ago, and on their web site there is information on Dorin belt driven compressors. In the cross reference charts it shows “Tecumseh 1000” as “New Blissfield 2Q5”. However, it also shows Tecumseh HGC 850, but not Tecumseh HGC 1000. I am awaiting a reply from Blissfield as to what oil I should use, but I thought someone on the forum might be able to help.
1. Please can anyone advise what oil I should use? (a popular brand available in Europe).
2. Does anyone have an old service manual?
Many thanks
-
01-01-2010, 07:30 PM #2
Re: Tecumseh HGC 1000 oil specification
I think Suniso 5GS would do, but i'd wait for a second opinion
-
01-01-2010, 10:53 PM #3
Re: Tecumseh HGC 1000 oil specification
Dupont state that R413a can be used with any oil so it is down to the compressor for the oil to be used.
edit: Some suggestions on the oil to be used here..
http://www.rparts.com/Catalog/Major_...ssfield_ed.aspLast edited by Brian_UK; 01-01-2010 at 10:55 PM.
Brian - Newton Abbot, Devon, UK
Retired March 2015
-
02-01-2010, 12:08 AM #4
Re: Tecumseh HGC 1000 oil specification
Hi,
The HGC1000 was both an automotive compressor (6000rpm)for air cond and the desigantion 'C' (500>1500rpm)was commercial R12.
Oil type for commercial is Suniso 3GS.
Automtive use was 5GS.
I have tech data for this comp,,,,drop me an email and i'll scan it back.
Regards
Lawrie
ljrefrigeration@pacific.net.au
-
02-01-2010, 06:55 AM #5
Re: Tecumseh HGC 1000 oil specification
You can use 3GS, 4GS and 5 GS. Only the viscosity changes a little bit.
We used for open compressors always 4GS of Suniso.It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.
Similar Threads
-
specification for Matsu****a
By matemo2008 in forum Air ConditioningReplies: 1Last Post: 08-07-2010, 08:23 PM -
Tecumseh Compressor
By benandatea in forum New to REReplies: 3Last Post: 27-07-2009, 10:48 PM -
Cooling down the water in a 1000 liter container
By Joep Hogenhout in forum Technical DiscussionsReplies: 29Last Post: 21-04-2009, 01:27 AM -
Ammonia Piping Specification
By Volnei in forum NH3Replies: 19Last Post: 07-11-2008, 12:42 AM -
Ewpc 1000
By GEJA in forum Trouble ShootingReplies: 3Last Post: 13-01-2006, 06:52 PM