Fridge/freezer integ running pressure

[TaffyLad]

Hi,

Unfortunately I committed myself to looked at my friends Maytag fridge freezer. It runs on R134a. I'm not sure what suction pressure this should be running at as the only R134a integrals I have worked on are HT. Any help would be appreciated.

[Brian_UK]

Suction pressure rules should apply to whatever equipment it is depending on temperatures.

You haven't given us any readings so we assume that it is working OK ?

[sedgy]

hi taffylad, well you will be weighing the charge in wont you? the charge will be on the fridge . but as brian indicated you just use your comparitor to see the suction psi

[TaffyLad]

Sorry, I forgot some of the key points here. Its not working. Both HT and LT sides. Suction is pulling into a vac. I was going to charge it up by pressure and try and find a leak.
As you may have gathered I have never worked on a domestic integral before.

[baycuclaudyu]

What is the type of your fridge ?No frost type or static freezer ?

[sedgy]

hi taffylad, so you are leak testing with refrigerant are you?

[paul thompson]

hi taffylad, so you are leak testing with refrigerant are you?

naughty naughty . you want to be using ofn for your leak/ pressure testing