Results 1 to 5 of 5
-
12-12-2009, 01:52 PM #1
Maneurop, Copeland, Performer compressors
If there is any one out there that has any connection to Maneurop, copeland, performer etc could you please make a recomendation that carrying handles be fitted onto these compressors, im sure it wouldnt cost the earth to do and would certainly make the engineers job alot easier when carrying them
Thanks
-
12-12-2009, 03:28 PM #2
Re: Maneurop, Copeland, Performer compressors
They are tricky things to lift and carry aren't they. There is a carry handle available (forget who makes it) that makes use of the lifting eye these comps have welded to the top, it hooks in, provides a handle in the centre above the comp and has a steadying bar that goes down the side of the comp.
May be worth getting one if you change a lot of compressors.
-
12-12-2009, 10:04 PM #3
Re: Maneurop, Copeland, Performer compressors
For copelands and prestcolds always had some long bolts in my toolbox to fit into the body to act as handles. As for maneurops bear hug and grunt or theres always the special tool.............. the apprentice!!!
-
21-12-2009, 12:02 PM #4
Re: Maneurop, Copeland, Performer compressors
i am looking for a simple calculator for working out equipment size for cold rooms
-
27-12-2009, 10:24 AM #5
Re: Maneurop, Copeland, Performer compressors
cheers guys i do use a "make shift tools" id like to use the apprentice but he can just about lift his butty box
Similar Threads
-
Suniso 3GS instead of Maneurop white oil 160P
By nike123 in forum Air ConditioningReplies: 8Last Post: 01-11-2010, 05:42 AM -
Maneurop ntz compressors
By chemi-cool in forum CommercialReplies: 5Last Post: 22-10-2009, 10:06 PM -
Compressors - screw or reciprocating?
By Josip in forum Industrial CompressorsReplies: 18Last Post: 27-01-2009, 10:36 PM -
Do we have some expert in replacing compressors
By Zahid in forum Air ConditioningReplies: 2Last Post: 01-07-2008, 07:59 AM