Results 1 to 4 of 4
Thread: gear benders
-
03-12-2009, 09:13 PM #1
gear benders
3/4'' and 7/8'' benders where has em in stock
or what do u se to bend the above size pipe, hard drawn
-
04-12-2009, 02:20 AM #2
Re: gear benders
Hi refaircon.
Check with local hydraulic fit out company, they use small electric benders for their seamless s/s pipe, long radius bends. But check the hard drawn copper pipe spec's., the re-cycled stuff is not bend freindly. Use the half hard grade.
-
04-12-2009, 01:53 PM #3
Re: gear benders
I've got some imperial eastman gearbenders for 7/8" which we got from RPW, but most wholesalers should be able to get them. Shop around as prices range, i think we paid around £200 for them.
I also have a set of REMS hand benders for 5/8" 3/4" and 7/8" which are very good but hard work with 7/8" which i got from pipeline centre.
Rothenberger make a cheap set of hand benders which are ok but i don't like the quality of the 3/4" bends it makes.
-
04-12-2009, 09:35 PM #4
Re: gear benders
i've got ite hydraulic benders. they bend soft and hard up to 7/8 an absolute god send. bye bye springs and scoles :.)
Similar Threads
-
Pipe Benders 1" 5/8
By ronaldo9 in forum Tools and CalculatorsReplies: 4Last Post: 07-09-2009, 03:56 AM -
Can Anyone Identify this Switch Gear?
By Grizzly in forum Chit Chat & Service StoriesReplies: 2Last Post: 20-09-2008, 03:53 PM -
scholl benders
By refaircon in forum Tools and CalculatorsReplies: 1Last Post: 09-08-2008, 10:37 AM -
ratchet benders
By richelli in forum Tools and CalculatorsReplies: 5Last Post: 19-07-2008, 09:01 PM -
gear bender
By freezy in forum Tools and CalculatorsReplies: 5Last Post: 22-10-2006, 05:03 PM