Results 1 to 4 of 4
Thread: Grasso imbalance
-
30-11-2009, 05:43 PM #1
Grasso imbalance
Guys,
I was told by one of the guys here that Grasso Screw Compressors have some sort of an imbalance and that they cause a damage in the long run. The guy suggested to use Sabroe as well. Is there any truth in the same? As far as I know both the brands are equally good. Please provide inputs on the issue.
Thanks very much.
-
05-12-2009, 01:10 AM #2
Re: Grasso imbalance
If you're going to swith a grasso or sabroe unit, you are better off to look to mycom or Frick. Parts are more available and less expensive.
Ben
-
08-12-2009, 10:27 AM #3
Re: Grasso imbalance
Mycom and Frick are well know for having the most expensive spare parts. Gosh if you look for a good compressor use J&E Hall or Howden
-
16-12-2009, 03:47 AM #4
Re: Grasso imbalance
Hate to tell you this but Frick aquired Sabroe/Stall a few years ago. Its really your opinuion what you chose, just choose whats best for you or your end user
Similar Threads
-
Slide valve wear on Grasso screw after just 54000 Hrs
By Lodiev in forum Technical SpeculationsReplies: 11Last Post: 14-09-2009, 01:21 PM -
Grasso SP2 duo packs
By aawood1 in forum NH3Replies: 7Last Post: 12-06-2009, 10:56 AM -
Grasso SP2 two-stage ammonia screw compressor package.
By Jacek in forum NH3Replies: 2Last Post: 25-01-2009, 12:17 PM -
Grasso spares
By Slush Puppy in forum Industrial CompressorsReplies: 4Last Post: 23-01-2009, 05:44 PM -
KAB (Grasso) drawing
By Gerben in forum Industrial CompressorsReplies: 5Last Post: 19-01-2008, 01:27 PM