Results 1 to 2 of 2
Threaded View
-
27-11-2009, 06:50 PM #1
Dear All,
I'd like to ask if someone has experience with absorption/adsorption chillers utilizing industrial waste heat. The source is hot air and waste gases from industrial furnaces at 125°C (not very high).
The question is what refrigerant and adsorbent/absorbent can work with this heat source at this temperature. Also if anyone has experience with any manufacturers they can share their impressions and recommendations.
I will appreciate every comment or experience on this topic.
Cheers,
RumenLast edited by chillin out; 29-11-2009 at 02:31 PM.
Similar Threads
-
Capacity control
By sparrow in forum TrainingReplies: 44Last Post: 18-01-2010, 07:49 PM -
Some information on the aplication of suction gas/liquid line heat exchangers
By SteinarN in forum FundamentalsReplies: 5Last Post: 14-09-2009, 07:33 AM -
Basics or is it?
By Fett in forum FundamentalsReplies: 17Last Post: 10-09-2009, 01:45 AM -
frostles heat pump
By Lc_shi in forum New TechnologiesReplies: 27Last Post: 31-03-2008, 07:53 AM -
heat exchanger for small chiller
By star882 in forum FundamentalsReplies: 4Last Post: 30-01-2007, 12:06 PM