Results 1 to 3 of 3
  1. #1
    Jenmar's Avatar
    Jenmar Guest

    Post Troubleshooting/Design Help required for DX Shell&Tube Evapourator with R134a



    Hello,

    Our company is looking to hire a consultant who is an expert in direct-expansion shell & tube evapourator design and familar with R134a and internally enhanced tubes.

    We have designed and built a 56 ton evapourator however the pressure drop of the refrigerant thru the tubes is much higher than expected. We are looking for a expect who can take a look at the design and determine the expected amount of pressure drop. Design assistance would be needed if a new evapourator is required.

    Does anyone know of such an expert I could get in touch with? Perhaps a retired refrigeration engineer who is looking for consulting work.

    Regards,
    Sean



  2. #2
    Join Date
    Jan 2009
    Location
    INDIA
    Posts
    40
    Rep Power
    0

    Re: Troubleshooting/Design Help required for DX Shell&Tube Evapourator with R134a

    Quote Originally Posted by Jenmar View Post
    Hello,

    Our company is looking to hire a consultant who is an expert in direct-expansion shell & tube evapourator design and familar with R134a and internally enhanced tubes.

    We have designed and built a 56 ton evapourator however the pressure drop of the refrigerant thru the tubes is much higher than expected. We are looking for a expect who can take a look at the design and determine the expected amount of pressure drop. Design assistance would be needed if a new evapourator is required.

    Does anyone know of such an expert I could get in touch with? Perhaps a retired refrigeration engineer who is looking for consulting work.

    Regards,
    Sean
    Please contact for techinal discussions and other related maters on email id which is as follows
    ambrish12@indiatimes.com

  3. #3
    Join Date
    Mar 2009
    Location
    KZN, South Africa
    Age
    63
    Posts
    2,212
    Rep Power
    20

    Re: Troubleshooting/Design Help required for DX Shell&Tube Evapourator with R134a

    If this project is still open, I'd be more than happy to assist on the thermal review. You can contact per RE pm.
    Engineering Specialist - Cuprobraze, Nocolok, CD Technology
    Rarefied Technologies ( SE Asia )

Similar Threads

  1. R507 in an R134a compressor: any danger?
    By DaBit in forum Technical Speculations
    Replies: 30
    Last Post: 21-12-2009, 01:44 AM
  2. Clogged condenser leading to no gas on R134a systems?
    By runningonavac in forum Refrigerants
    Replies: 12
    Last Post: 01-09-2009, 10:52 PM
  3. Replies: 5
    Last Post: 01-03-2004, 10:59 PM
  4. R507 in an R134a compressor: system design
    By DaBit in forum Technical Speculations
    Replies: 17
    Last Post: 01-05-2003, 09:25 AM
  5. Minimal required R134a speed in suction line
    By DaBit in forum CPU Overclockers
    Replies: 32
    Last Post: 08-05-2002, 05:19 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •