Results 1 to 5 of 5
Thread: Centrifugal Chillers
-
21-11-2009, 10:55 AM #1
Centrifugal Chillers
New to them and just learning please explain how you charge them. Is it in a liquid form through the suction and how do you tell when you are full on gas (approch)? Can someone be kind enough to explain to me how this works and how you do it. Thank-you
-
21-11-2009, 05:32 PM #2
Re: Centrifugal Chillers
hi califonia, I take it you are starting from a vaced out unit?
1- start up both water pumps
2- vapour into system< just so the water dose not freeze up< < on r22 this would be 58 psi< then liquid into condencer , run on test , adjust as requiered, all the best
-
22-11-2009, 12:20 AM #3
Re: Centrifugal Chillers
We do mostly supermarket refrigeration and couple small industrial refrigeration accounts. We are starting to branch off into Chillers and next week am going to a trane and vilter class back to back. I am going to send myself to 5 more of these trane classes since there only couple states away from me.
Thank you for your help
-
22-11-2009, 08:57 AM #4
Re: Centrifugal Chillers
Hi California, recently i have attended a commissioning job of mitsubishi centrifugal compressor. Mitsubishi authorized technicians break the vacuum by using vapor refrigerant. Then charged almost liquid to evaporator. Fully charged while running. (Should be start the chw pump as charging).my opinion, charge liquid to condenser to the level of manufacture desired
Moideen-dubai
-
24-11-2009, 06:07 AM #5
Re: Centrifugal Chillers
Thank-You I will be attending some classes Vilter Screw in 2 weeks and Trane water cooling in 1 week. I have to take a # of classes before I can take CentriVac class
Similar Threads
-
centrifugal chillers york
By Magic in forum Technical DiscussionsReplies: 6Last Post: 12-11-2009, 06:08 PM -
Centrifugal chillers Macquay technical
By Rigo in forum TrainingReplies: 0Last Post: 03-04-2008, 05:33 AM -
Big Centrifugal chillers
By 404cab in forum Industrial CompressorsReplies: 49Last Post: 17-12-2007, 08:06 PM -
Centrifugal chillers part 2
By reggie in forum Industrial CompressorsReplies: 0Last Post: 16-05-2002, 09:07 AM -
Centrifugal chillers
By reggie in forum Industrial CompressorsReplies: 2Last Post: 02-05-2002, 07:22 AM