Results 1 to 3 of 3
Thread: Fabdec 800 ice bank
-
21-11-2009, 10:15 AM #1
Fabdec 800 ice bank
I'm not sure if i've posted in the correct section but if not can one of the mods please move it.
I'm working on an icebank water chiller that has been taken out and i am reinstalling it.
It's at least 15 years old and the model i have is an icebank 800 by Fabdec.
Theres no wiring diagrams or anything with it and iv'e never worked on one of these.
I've tried the fabdec website but i can't seem to find an installation manual for it or even a service manual.... i know i'm probably going to struggle but even if some one has worked on these before can give me a bit of guidance it would be much appreciated as always
The difference between genius and stupidity is that genius has its limits.
Marc
-
21-11-2009, 12:47 PM #2
Re: Fabdec 800 ice bank
I work on these all the time, have installed loads of them.
Is is blue or stainless steel?
I might have an install book for these, will have a look.
-
21-11-2009, 02:03 PM #3
Re: Fabdec 800 ice bank
Yes it's blue, an install manual would be great if poss, just sent you a PM.
The difference between genius and stupidity is that genius has its limits.
Marc
Similar Threads
-
Ice Bank Tank Coil Design
By kamilmohammed in forum FundamentalsReplies: 17Last Post: 31-01-2010, 03:52 PM -
Ice Bank Design/Help
By kingc66l in forum Technical DiscussionsReplies: 6Last Post: 24-01-2010, 12:11 AM -
Ice Bank Tank for Chilled Water
By Samarjit Sen in forum CommercialReplies: 26Last Post: 31-10-2009, 09:18 AM -
Sizing of Capacitor bank
By Kevin Yeo in forum FundamentalsReplies: 9Last Post: 28-03-2009, 06:08 AM -
Ice Bank
By chemi-cool in forum CommercialReplies: 3Last Post: 07-10-2008, 12:20 AM