Results 1 to 45 of 45
Thread: thermoking software
-
11-12-2008, 08:19 PM #1
thermoking software
can someone give me tk software because I want to make a data download and I can't.
Thank You !!!
-
11-12-2008, 08:54 PM #2
-
11-12-2008, 10:34 PM #3
Re: thermoking software
try send it to florea@delatreid.ro or traian_flo@yahoo.com
brgds and thank you
-
11-12-2008, 10:37 PM #4
Re: thermoking software
by the way, I have data cable that works with carrier and daikin reefers. I think that works with t.k. too (I never looked at those one's because I didn't had the software ) )
-
12-12-2008, 12:25 PM #5
Re: thermoking software
Hi Lool,
I did sent you below mationed.
TK SmartSponge Installation Instructions.pdf
TK SmartSponge Software V1.2A (Full Install).exe
User manual for Thermo King SmartSponge Software.pdf
Best regards.
Reefer mechanic..
-
13-12-2008, 01:39 AM #6
Re: thermoking software
Hi all,
I am new in RE.I work as reefer technician.
can some one give me TK software for reefer container?
-
14-12-2008, 06:57 PM #7
Re: thermoking software
Hi Farug
You send e-mail.
serkan.humasalar@ardep.com.tr
See you
reefer mechanic.
-
16-12-2008, 08:52 AM #8
Re: thermoking software
Hi reefer mechanic,
I have try get data from a unit and successful.Thanks a lot
-
02-03-2009, 10:52 PM #9
Re: thermoking software
can you send the software at andreiortan@yahoo.com thanks
-
20-04-2009, 11:33 AM #10
Re: thermoking software
can you send the software at artur_stanczuk@interia.eu thanks
-
03-05-2009, 07:08 PM #11
Re: thermoking software
Can you send the software at carin_yo@hotmail.com thank you, also where can I get the cable that is needed (rs232)??
Thanks
-
04-05-2009, 05:01 PM #12
Re: thermoking software
I learning about reefer is it possible that I can also get a copy of that software. email is gillelectrical@gmail.com
thankyou
-
06-05-2009, 08:57 PM #13
Re: thermoking software
Hi reefermechanic
is it possible that I can also get tk. software email is frigolaki@sbb.co.yu
-
07-05-2009, 04:45 AM #14
Re: thermoking software
hi Sparkyroger,ccaarriinn,artur,andreiortan,
I did send e-mail your adress...
Reefer mechanic
-
08-05-2009, 07:04 AM #15
Re: thermoking software
Hi, can you send me too?
Thnx.
-
08-05-2009, 01:41 PM #16
Re: thermoking software
HI Reefer mechanicReefer.
Do you think your good will could send me link for TK software?
Thank very much
my email= shadow@harleydeals.net
-
08-05-2009, 02:33 PM #17
Re: thermoking software
Hi guys. I just wouldnt like create a new thread and will be very appreciated for any help with marine reefers communication software. Actually i need almost all:
1. DataLine any version for Carrier Units.
2. Daikin Container Communication System (DCCS v.5.0)
3. Thermo King SmartSponge Software as Reefermechanic mentioned before (thank you in advance) .
A little about me. Im ukrainian ships electrical engineer on one of the Maersk chartered vessels and how you know im responsible for reefers on board when vessel at sea. Currently we are in China and i caring more then 650 boxes , some of them dangerous cargo (tanktainer with two free-standing reefer systems and emergency generator).
If some one need i have big collection of manuals in pdf format for most of existing marine reefer boxes and StarView software for StarCool reefers.
Waiting for yours help on e-mail: natayar@ukr.net
PS: How i mentioned above currenly im on board and i would reply as soon as it possible if someone interested any manuals or StarView.
Thank You & Best Regards.
YaroS
-
09-05-2009, 10:27 PM #18
Re: thermoking software
me two pls the software at mitya69@msn.com
-
12-05-2009, 04:45 PM #19
Re: thermoking software
May i get the software too? where can i buy the cable needed to access a thermoking unit?? k2_lundin@hotmail.com or kristofer.lundin@gavlenet.se
-
13-05-2009, 06:46 AM #20
Re: thermoking software
It would be a full time job emailing all you guys. lol
-
13-05-2009, 08:41 AM #21
Re: thermoking software
Can you send the software at er_amit_iitd@yahoo.com thank you,
-
13-05-2009, 11:16 PM #22
Re: thermoking software
Hey Reefermechanic. thankyou for the software. Also does this software do all the TK Reefers or just some.
-
14-05-2009, 08:11 AM #23
Re: thermoking software
Can you send the software at pasqual@poczta.onet.pl THX
-
15-05-2009, 07:07 AM #24
Re: thermoking software
Can you send the software to me too marko@foilpoint.ee Thank you
-
18-05-2009, 06:33 PM #25
Re: thermoking software
Hi, may I have a copy of this software, also. I can provide any information about Carrier units...
-
18-05-2009, 06:34 PM #26
Re: thermoking software
I forgot the email: yo9htz@gmail.com
-
20-05-2009, 06:12 PM #27
Re: thermoking software
Hi Reefer Mechanic,
Is it possible that can you send the software at dieroiba@hotmail.com ??
Thank you very much.
Best regards.
-
20-05-2009, 08:46 PM #28
Re: thermoking software
Hi Reefer Mechanic
If you could send the above to me would be gratefull teudave@live.co.uk
Thank's Dave
-
21-05-2009, 05:00 AM #29
Re: thermoking software
Moderators, please nuke this post so the begging will stop!
Last edited by abbsnowman; 21-05-2009 at 05:04 AM.
-
11-06-2009, 02:17 PM #30
Re: thermoking software
hi. would it be possible to get the software to make a download from a thermoking refer trailer please?
Many thanks email address is rob1eddy@tiscali.co.uk
-
14-06-2009, 11:44 AM #31
Re: thermoking software
"HI Reefer mechanicReefer.
Do you think your good will could send me TK software too?
or would u please post it up at 4shared.com
a site for free download
do convert exe to zip first
my mail id : majestic.govind@gmail.com
regards
govind"
-
23-06-2009, 07:21 PM #32
Re: thermoking software
Hello Reefer mechanicReefer,
Can you please send me TK sofrware?
Best regards!
-
13-07-2009, 04:28 AM #33
Re: thermoking software
Hi! Reefer mechanicReefer,
Can you send the software at pacificocean.info@gmail.com thank you,
-
13-07-2009, 05:13 PM #34
Re: thermoking software
Hi All,
I was send a download programs to somebody in here..But everybody wnats to me again again...Sorry..I dont have time for this))Your have to want other guys)
All the best)
Reefer mechanic.
-
13-07-2009, 08:38 PM #35
Re: thermoking software
Hate to say it but I told ya so.
Keep the requests to one at a time guys. We are doing what we can but also have lives to live!
-
16-07-2009, 05:05 PM #36
Re: thermoking software
Hi I'm from Latvia and I'm trying to find software that would work with TK trailers, if someone could help me I would be very pleased. Thank's
-
16-07-2009, 05:07 PM #37
Re: thermoking software
Forgot(silly me) - edvin@zb.lv
-
10-08-2009, 06:43 PM #38
Re: thermoking software
hello! How can I get the software for tk unit`s
-
10-08-2009, 07:03 PM #39
-
12-08-2009, 04:33 AM #40
Re: thermoking software
ok seriously mods, get rid of this thread. This is rediculous. We are trying to help some people and getting swampes with begging. Come on help us out here!!!
Stop asking for books etc. guys. How about you offer some help yourselves? Geeese your like parasites!
-
04-09-2009, 09:49 AM #41
Re: thermoking software
Hi Reefer Mechanic ,Can you send me too.
nickzarin@gmail.com
-
04-10-2009, 02:41 PM #42
Re: thermoking software
Damn this thread is out of control, I could really start some trouble by saying the smart sponge 1.2 is outdated and hardly ever used anymore.
TK uses differnt versions of software now for marine and truck trailer like wintrac 4.8.1, and York Logman PC software.
Carrier uses Dataline for marine and reefermanager for truck and trailer.
Back to the drawing board I guess.
A-Z
-
08-11-2009, 02:50 PM #43
Re: thermoking software
the program has some of the carrier
thanks
ReeferManager.exe
-
08-11-2009, 02:50 PM #44
Re: thermoking software
-
20-11-2009, 10:42 AM #45
Re: thermoking software
Hi ,
Is it possible that can you send the software at stefano.crescenzi@gmail.com ??
Thank you very much.
Best regards.
Similar Threads
-
Free Software
By mcjo tech in forum Tools and CalculatorsReplies: 96Last Post: 12-04-2011, 09:09 AM -
AC Design (Heat Load) Software
By Paul2uall in forum Tools and CalculatorsReplies: 13Last Post: 10-11-2008, 10:32 AM -
Car a/c software
By bozicaleksandar in forum Tools and CalculatorsReplies: 3Last Post: 20-10-2008, 05:23 PM -
Vehicle A/C Software?
By bozicaleksandar in forum Tools and CalculatorsReplies: 0Last Post: 17-10-2008, 11:38 PM -
Training software
By Morph in forum TrainingReplies: 13Last Post: 30-03-2005, 11:43 PM