Results 1 to 7 of 7
Thread: Overhauling Screw Compressor
-
17-11-2009, 02:23 PM #1
Overhauling Screw Compressor
Hi guys, being asked to overhaul a screw compressor to finish coursework but have no experience as our company only deal with supermarkets.
Anyone able to point me in the right direction to what I should be doing?
-
17-11-2009, 04:36 PM #2
Re: Overhauling Screw Compressor
dear, over hauling of screw compressor should be very care ful . if u cannot get any one then i will give u one email address that is mr bob he is from denmark. he will teach u how to do.
-
17-11-2009, 07:39 PM #3
Re: Overhauling Screw Compressor
HI, overhaul can be simple is you have the expirienve. We overhaul all brands.
If you look at our website . we can overhaul of may be exchange your compressor with warranty. Or we can invite you at our workshop to teach you. best regards martin rm-support the netherlands
-
22-01-2010, 05:41 PM #4
Re: Overhauling Screw Compressor
what size do you normally work on?
-
25-03-2010, 08:42 PM #5
Re: Overhauling Screw Compressor
Dear 2400martin
i can't see any link or address in your post.please put a URL to check your website.
thanks
-
25-03-2010, 08:59 PM #6
Re: Overhauling Screw Compressor
Hi, Jahangir
web page of 2400martin
http://www.rm-support.com/
Best regards, Josip
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.
-
13-10-2010, 04:05 AM #7
Similar Threads
-
Frick screw compressor
By pedersrg in forum Technical SpeculationsReplies: 11Last Post: 15-01-2012, 06:00 AM -
problem with volume on frick screw compressor
By samlee12 in forum IndustrialReplies: 4Last Post: 29-10-2009, 06:06 AM -
Oil Lifting Problem in NH3 screw compressor
By SURESH YADAV in forum Refrigeration - The StoriesReplies: 20Last Post: 16-10-2009, 01:34 AM -
advantage of twin screw compressor over single screw compressor
By azzah in forum New to REReplies: 7Last Post: 23-09-2008, 09:24 AM -
parallel operation of screw compressor and piston type
By cheikh ahmed in forum FundamentalsReplies: 9Last Post: 26-08-2008, 08:34 AM