Results 1 to 3 of 3
Thread: Frick oil system
-
16-11-2009, 11:04 PM #1
Frick oil system
Hi all, been a while
Need to put a saftey valve on Frick oil cooler
150psi saftey should be okay?
PHE rated at 15bar working pressure but oil pressure should be around 3-4bar should it not?
Unlike the Howden oil pressure which needs to be about 3bar above discharge
Does this all sound right?
Cheers Paul.
-
17-11-2009, 06:45 AM #2
-
17-11-2009, 08:40 AM #3
Re: Frick oil system
I think the safety valve is to protect an equipment or operation, right ? THen the best is to find out the maximum pressure the equipment can handle and set the safety valve accordingly to a much lower pressure.
Similar Threads
-
Daikin fault codes
By Chris2005 in forum Air ConditioningReplies: 45Last Post: 21-03-2012, 10:09 PM -
Ammonia Heat Pumps
By US Iceman in forum New TechnologiesReplies: 39Last Post: 22-03-2010, 06:36 PM -
Fan model for system optimization
By autt in forum System OptimizationReplies: 8Last Post: 31-03-2007, 05:34 AM -
old frick system monitor
By rasgrant in forum NH3Replies: 5Last Post: 17-01-2007, 06:15 PM -
Automotive A/C Vent Temp Range vs System
By Don Browney in forum Air ConditioningReplies: 1Last Post: 15-05-2002, 06:19 AM