Results 1 to 14 of 14
Thread: andy bishop
-
23-10-2009, 04:35 PM #1
andy bishop
does anybody know what has happened with the old PR Products in pontardawe and andy bishop?
-
23-10-2009, 04:42 PM #2
-
23-10-2009, 04:53 PM #3
Re: andy bishop
thats great thanks alot,but what about the design guy that used to be there,andy bishop,any ideas???
-
26-10-2009, 10:46 AM #4
Re: andy bishop
That name rings a bell. Was he at Linde at one time?
-
26-10-2009, 06:40 PM #5
Re: andy bishop
Sure he went to Australia and tried to run PR Products from there. Shut down not long after that.
Shame, I bought a few good packs from him.
-
29-10-2009, 05:23 PM #6
Re: andy bishop
pr products now called pr plant andy is long gone, but mick cooper and gary bevan still breathing and giving great backup service with new products in the pipeline
-
02-11-2009, 03:20 PM #7
Re: andy bishop
Ive checked them out and yes the new company down there looks good.Andy Bishop did used to work for Linde but ive heard some stuff about him and want to contact him,any ideas anyone?
-
02-11-2009, 03:22 PM #8
Re: andy bishop
well ive since heard that he ran off to Australia and left the others to clean up his mess,just glad that other people have obviously got it going again down there and putting out even better packs than before.
-
03-11-2009, 09:13 PM #9
Re: andy bishop
bishop is australia where he belongs hope he stays there after hanging the boys out to dry good riddings to him
-
12-11-2009, 07:02 PM #10
Re: andy bishop
is that you lloyd?
-
14-11-2009, 05:53 AM #11
-
15-11-2009, 11:52 AM #12
Re: andy bishop
think he is working for city refrigeration
-
16-11-2009, 10:14 AM #13
Re: andy bishop
never heard of him
...and she said "give it to me you big fridgie"
-
18-11-2009, 09:19 AM #14
Re: andy bishop
Wasn't he the Service Manager at Linde during the Linde-Westward merger? As I said previously, the name rings a bell, but I can't put a face to it.
Similar Threads
-
what is the best blend for low temp
By tony_rich in forum RefrigerantsReplies: 87Last Post: 05-08-2006, 08:29 AM