Results 1 to 12 of 12
Thread: Designing Roll Bond Evaporator
-
06-11-2004, 04:05 AM #1
Designing Roll Bond Evaporator
I want to use roll bond evaporator in my vissi cooler (Show case Refrigerator). I contacted the manufacturers of the Roll Bond Evaporator with Refrigerator size (capacity and dimensions), ambient and required temperatures, compressor specifications etc and asked them to offer suitable roll bond evaporator. But they are asking me for a drawing and design of the evaporator. Can anyone help me in designing a roll bond evaporator.
-
06-11-2004, 06:45 AM #2
Re: Designing Roll Bond Evaporator
Originally Posted by Munzar Ata
If the showcase was not designed for refrigeration, does it have insulation and a vapor barrier? Have you thought about condensation run-off?
Rog
-
06-11-2004, 09:28 PM #3
Re: Designing Roll Bond Evaporator
Take a look here: http://www.rparts.com/Catalog/Major_...m_rollbond.asp
-
07-11-2004, 04:25 AM #4
Re: Designing Roll Bond Evaporator
Originally Posted by RogGoetsch
Any suggestions as how to design the RB evaporator. I'm already producing this unit with Inner Al body wraped with Cu evaporator coil.
-
06-01-2008, 11:23 AM #5
-
06-01-2008, 11:25 AM #6
Re: Designing Roll Bond Evaporator
for designing roll bond evaporator we require your application and dimensions of referigerator
-
06-01-2008, 11:30 AM #7
-
11-01-2008, 12:47 PM #8
Re: Designing Roll Bond Evaporator
vakilnikhil - I work for a company that designs and makes solar panels and am working on a product where we are looking to use a rollbonded heat exchanger - please could you give me your details so I can contact you?
-
14-01-2008, 11:02 AM #9
Re: Designing Roll Bond Evaporator
Also,
Munzar Ata - could you please tell me the name and contact details of the roll bond evaporator you have found?
Thanks
Andy
-
22-01-2009, 10:45 AM #10
Re: Designing Roll Bond Evaporator
Hi Andy,
You can contact CGA, an Italian manufacturer of Roll Bond panel (the world leader). Their website is: cgaspa.it
Their email address is in the website.
If you send them an email with the explainations of your company/project/needs, they should be able to help you.
They already have a big experience in Roll Bond solar panels manufacturing.
If you have no answer in the next few days, just let me know and I'll help you.
-
03-05-2009, 05:28 PM #11
Hi there
Do you know any of the companies that produce roll bond evaporator machinery. I want to buy machineries to produce roll bond evaporator (and wire on tube condenser) for my company.
info@pgi.ir
Thanks in advance for your reply
Eddi
Dear Sirs/Madam
Following the growth of our company Pars Goharsun and demand of the market in home refrigerator producing companies in Iran We are going to establish a planet to produce roll bond evaporators.
Please Let us know if you can help us
Thanks in advance
Best Regards
Hamid Karimi
info@thepars.comLast edited by chillin out; 04-05-2009 at 05:38 PM.
-
05-08-2010, 11:31 AM #12
Re: Designing Roll Bond Evaporator
for any rollbond requirements talk to hawco technical phone 01483869069 or go to
all the w's.hawco.co.uk
Similar Threads
-
Air Source Heat Pump - temp of refrigerant leaving evaporator
By anup in forum FundamentalsReplies: 3Last Post: 06-11-2006, 05:04 AM -
Evaporator Design-Air Source Heat Pump for water heating
By anup in forum Technical DiscussionsReplies: 7Last Post: 20-03-2006, 02:26 PM -
Searle Evaporator Heaters
By Abe in forum CommercialReplies: 14Last Post: 31-12-2005, 10:24 AM -
Change evaporator
By tralex in forum FundamentalsReplies: 6Last Post: 29-12-2005, 07:53 PM -
Roll Bonded Evaporator
By Vicky in forum Technical DiscussionsReplies: 1Last Post: 24-02-2005, 01:57 PM