Results 1 to 6 of 6
Thread: can anyone help?
-
07-10-2009, 09:57 PM #1
can anyone help?
I have been asked whether I can repair an old Mitsubishi split unit model CS-4THV11NP. The unit is approx 23 years old. I have determined that the PCB is faulty in the evapoator unit. Tried the manufacturers for spares but was told that the spares for this unit are obselete.
Would any one have and old useable PCB lying about that I could purchase or does anyone know of anyone that could repair this PCB?
Regards.
Nigel.
-
07-10-2009, 10:47 PM #2
Re: can anyone help?
Would Mitsi have anything similar that could be adapted ?
Brian - Newton Abbot, Devon, UK
Retired March 2015
-
07-10-2009, 11:42 PM #3
Re: can anyone help?
Give these a ring. They will probably be able to fix it.....it'll cost you though
eggsLast edited by eggs; 07-10-2009 at 11:44 PM. Reason: wrong link
-
08-10-2009, 12:59 AM #4
Re: can anyone help?
maybe check with Panasonic for spare parts, you might have a better chance :-)
-
23-10-2009, 05:28 PM #5
Re: can anyone help?
Get yourself an Eberle room stat giving on/off, 3 fan speeds, heating and cooling outputs, and rewire the whole unit. Stat about 30 quid, half a day rewiring.
-
24-10-2009, 04:13 PM #6
Re: can anyone help?
Control Boards, Inverters are repaired here ndc-uk.com