Results 1 to 11 of 11
Thread: Wondering about TX valves.
-
04-10-2009, 03:22 PM #1
Wondering about TX valves.
Hey I know this may be a stupid question but I just got out of school and I have a guy wanting me to help him with a side project at his house for a cooler in his garage..he has everything he needs but a TX Valve, the system will run off R-22 so do I just need to get any compatible TX Valve or is it more specific.
-
04-10-2009, 04:33 PM #2
- Join Date
- Sep 2007
- Location
- Split Croatia
- Age
- 57
- Posts
- 6,151
- Blog Entries
- 6
- Rep Power
- 36
Re: Wondering about TX valves.
We need to know compressor make and model # and what is cooler working temperature.
-
04-10-2009, 11:36 PM #3
Re: Wondering about TX valves.
I dont know the exact model number it is a tecumseh condensing unit and we'll be running it about 35-40..This is also just a little side job doesn't need to be fancy he just cuts a little meat in his garage and just wants something thrown together that will run.
-
04-10-2009, 11:41 PM #4
- Join Date
- Sep 2007
- Location
- Split Croatia
- Age
- 57
- Posts
- 6,151
- Blog Entries
- 6
- Rep Power
- 36
-
04-10-2009, 11:43 PM #5
Re: Wondering about TX valves.
Also this isnt the case with this job as all components came with the system except the TX Valve but would it be possible to fun a system with basically just the compressor evap condensor and TXV..meaning withought the drier and LLSV and stuff..Like I said I'm just out of school and just being curious.
-
05-10-2009, 12:42 AM #6
Re: Wondering about TX valves.
listen to what nike says otherwise you can end up with slimy or dry meat
mmm to beer or not to beer...........lets drink breakfast
-
05-10-2009, 01:21 AM #7
- Join Date
- Sep 2007
- Location
- Split Croatia
- Age
- 57
- Posts
- 6,151
- Blog Entries
- 6
- Rep Power
- 36
-
05-10-2009, 02:11 AM #8
Re: Wondering about TX valves.
AHB7511AXDXC is the model number and the evap coil is a husmann 95096-c
-
05-10-2009, 06:22 AM #9
Re: Wondering about TX valves.
You're just out of school, was that a refrigeration related school you just left at 21 years?
It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.
-
05-10-2009, 02:43 PM #10
- Join Date
- Sep 2007
- Location
- Split Croatia
- Age
- 57
- Posts
- 6,151
- Blog Entries
- 6
- Rep Power
- 36
Re: Wondering about TX valves.
Danfoss TEX-2 with oriffice 02!
Order no:
- Valve Body 068Z3209
- Orifice Assembly 068-2015
-
05-10-2009, 06:51 PM #11
Re: Wondering about TX valves.
hi
may be it comes with orifice&he didnt knew it
Similar Threads
-
Too dependent on Danfoss Valves
By kelvin_27_84 in forum IndustrialReplies: 8Last Post: 24-01-2009, 08:33 PM -
Stainless steel valves
By Tycho in forum NH3Replies: 5Last Post: 05-11-2008, 02:16 PM -
Understanding Balance port TX valves
By Mobbsy in forum Technical DiscussionsReplies: 12Last Post: 23-07-2008, 04:32 AM -
Hinari and how far to open valves
By stryker in forum Air ConditioningReplies: 6Last Post: 14-04-2008, 01:47 AM -
dan foss tx valves
By fuzzy in forum Trouble ShootingReplies: 7Last Post: 02-10-2007, 01:11 PM