Results 1 to 3 of 3
Thread: R22 -> nh3
-
01-10-2009, 07:09 PM #1
regular poster
- Join Date
- May 2007
- Location
- Pennsylvania
- Age
- 51
- Posts
- 113
- Rep Power
- 18
R22 -> nh3
Looking to convert a large cold storage (60k#) R22 system to an NH3 system. Can anyone recommend a A&E firm on the east coast? Preferrably in PA/NY/NJ
-
17-10-2009, 04:28 PM #2
Veteran Poster
- Join Date
- Mar 2009
- Location
- U.S.A.
- Posts
- 320
- Rep Power
- 20
Re: R22 -> nh3
Webber Smith probably the most obvious. But if you are looking to team an Engineer with a Contractor to get the actual conversion undertaken in a more direct fashion, presuming the Architecture portion is not dominant: contact Jack Piho.
-
18-10-2009, 02:08 AM #3
VIP Poster
- Join Date
- Aug 2005
- Location
- USA
- Posts
- 5,302
- Rep Power
- 25
Re: R22 -> nh3
I would not recommend an A&E firm. I would suggest talking to Jack first and then go from there.
A&E firms typically deal with new systems, you want someone who has been around the block and dealt with issues on older existing systems.
If all else fails, ask for help.
