Results 1 to 2 of 2
Thread: Valve ratchets
-
30-09-2009, 09:24 PM #1
Valve ratchets
Those Imperial valve ratchets never seem to last that well, often one of the teeth seems to get a bit worn and it slips every now and then.
So i have got myself a set of these which are prooving useful and you can use an extension bar or uj with them.
http://www.uktools.com/piece-3834dri...t-p-10096.html
Jon
-
01-10-2009, 09:07 AM #2
Re: Valve ratchets
Cannot tell for sure from pix shown but resembles a lot the BELZER refrigeration wrench set. Really good gear from Germany. Just now a Google search shows it was bought over by BAHCO in 1988, which in turn was bought by Snap On in 1999!
regards
T-PRemember what Augustus once said:
"festina lente" - make haste, slowly!
Similar Threads
-
LEV does not open
By Yuri B. in forum Air ConditioningReplies: 7Last Post: 19-07-2009, 02:37 PM -
Motorized Ball valve versus Globe valve for modulating application
By Sridhar1312 in forum IndustrialReplies: 2Last Post: 06-02-2009, 07:35 PM -
R22 Flooded System - Trawler
By chiefbecker in forum System OptimizationReplies: 18Last Post: 07-02-2008, 11:11 PM -
Service Procedures For TK Scroll
By absolute-zero in forum TransportReplies: 0Last Post: 03-02-2008, 07:42 PM -
Benji
By benji in forum Trouble ShootingReplies: 29Last Post: 30-01-2008, 01:25 PM