Results 1 to 3 of 3
Thread: Samsung RL36EBNS "rd" error
-
28-09-2009, 04:06 PM #1
Samsung RL36EBNS "rd" error
I have a Samsung RL36EBNS fridge freezer, when I turn it on it start up and then stops "rd" is displayed on the display. After doing a bit of research I found that it has something to do with either the fan motor or the sensor I have taken the cover off and checked; when the fridge/ freezer powers up the fan starts spinning and the little square blade starts spinning (to me that rules out any motor failures, please correct me if I am wrong), so I think I will need to replace the magnetic position sensor?
If that's the case where can I buy the sensor or does it only come as part of some motor...?
Thank you for your help and advise.
-
30-09-2009, 03:54 PM #2
Re: Samsung RL36EBNS "rd" error
temp sensor is at fault
-
30-09-2009, 04:00 PM #3
Re: Samsung RL36EBNS "rd" error
How can I find out which sensor is at fault, as there are a few in there.
Thanks
Similar Threads
-
Samsung SR-L3, error code "rd"
By Rtic in forum DomesticReplies: 13Last Post: 16-09-2010, 08:57 PM