Results 1 to 11 of 11
Thread: Gas-fired motor
Hybrid View
-
22-10-2004, 05:22 PM #1
Gas-fired motor
I went on a Mitsubishi Heavy Industries course a few weeks ago and the guy just touched on this.
What it was, was a natural gas fired motor that drives the comp.
I don't know much about the workings of this system, except that it can provide better heating at lower ambient temps(due to the motor producing heat) and that it is one of their most efficient systems available!
This might not be new to a lot of you, but it sure did fascinate me!!!Last edited by Coolie; 23-10-2004 at 09:22 AM.
Never underestimate anybody, you never know when they will make you look like an idiot!
-
22-10-2004, 08:18 PM #2
Re: Gas-fired motor
Sounds like the Sanyo VRV which is powered by a gas fired engine. Just another way of powering the compresor
-
22-10-2004, 11:54 PM #3
Re: Gas-fired motor
Yes, there is a small article on it in Autumn issue of Service Engineer. They have installed it at GlaxoSmithklines site in Woking due to the lack of any additional electrical supply to the site.
Brian - Newton Abbot, Devon, UK
Retired March 2015
-
23-10-2004, 01:20 AM #4
Re: Gas-fired motor
Techogen http://www.tecogen.com/ has been making them for years. The maintanence costs on them seems pretty high. Not only do you need to service the reefer side but the engine side. Very few people I know of in this feild service the engine side. The ones we have serviced we subbed it out.
York tried this in the US a few years ago. Small stuff maybe up to 5 tons. It was one of their biggest failures ever. Briggs and Stratton engines driving the compressor. They ended up giving most of the people that had them a free heat pump.
-
30-10-2004, 12:22 PM #5
Re: Gas-fired motor
A company in Belgium is making such a units
http://www.skt.be/hosting/SKT/websit...&cat=Produkten
A B& S motor has a MTBO of 150 to 200 hours!! They're made for lawnmowers and generators.It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.
-
20-08-2005, 08:46 PM #6
Re: Gas-fired motor
Mitsi are making them, they use a engine to drive the compressor. Seen simular where a generator runs on gas, supplies 60% electric to building and the rad water goes into the swimming pool. Makes massive savings for energy
-
20-08-2005, 08:56 PM #7
Re: Gas-fired motor
Denco were using these about 20 years ago for large swimming pool applications using a 1.6L ford engine and a rotacold rotary compressor. The function was to use the DX coil for de-hum and the engine exhaust for re-heat through a heat exchanger. It worked really well. Servicing was a bit wierd, it was like servicing your car at home but getting paid for it!!!
-
22-08-2005, 04:41 PM #8
Re: Gas-fired motor
Hi Guys
Im a Tech Manager for Sanyo if anybody needs any info on these let me know I would be happy to provide it . The Mitsu Heavy Unit is a 2 pipe cooling or heating only Vrf . Sanyo have the Only commercially available 3 pipe simultaneous unit on the market. The ghp never defrost and will give full heating capacity
in an ambient down to -20 degrees c.The service on the engine is carried out every 10,000 run hours or every 3.5 years given the compressor runs 8 hours a day 5 days a week. While on cooling the cooling water from the engine can be used to heat a calorifier giving 22 kw of hot water FOC. We also do a full range of 2 pipe units which can be connected to an evaporator to provide chilled water. Or the system can be mixed with some chilled water and some Dx cooling. anyway Im waffling on a bit if any body wants any more info let me know
Bye
T2
ps. If anybody knows where i can download a movie of the internal workings of an engine let me know im trying to put togeather a training presentation.
Thanks
T2Last edited by techguy; 22-08-2005 at 05:18 PM.
-
22-08-2005, 06:40 PM #9
-
13-04-2010, 09:50 PM #10
-
29-08-2005, 06:52 AM #11
Re: Gas-fired motor
techguy
could you give me a catalogue for it?
rgds
LC
Similar Threads
-
Fan motor over heating & Shuting down.
By Rookie in forum DomesticReplies: 15Last Post: 30-06-2005, 11:21 PM -
Fan Motor
By Coolie in forum Technical SpeculationsReplies: 38Last Post: 16-02-2005, 08:03 PM -
Evap motor no come on
By Apprentice in forum Technical DiscussionsReplies: 13Last Post: 04-12-2003, 04:07 PM -
Motor Oil vs Refrigerant Oil
By zolar1 in forum Technical SpeculationsReplies: 8Last Post: 26-11-2003, 12:43 AM -
current draw on condenser fan motor
By dan wong in forum Trouble ShootingReplies: 15Last Post: 25-05-2001, 06:12 AM