Results 1 to 3 of 3
  1. #1
    neil:)'s Avatar
    neil:) Guest

    apprentice info please!!



    hey everyone just joined!!

    ive just left school and looking for an apprenticeship, have applied for an apprentice transport refrigeration engineer and the companies sending me out an appliaction form.

    about me- Am 18 have a full driving licence and have all the required grades including maths, english, double award science, technology and design and resistant materials etc

    looking some general info into the job and what the entry tests will be like??? if i get that far lol

    any info or tips would be great!

    thanks neil



  2. #2
    Join Date
    Oct 2009
    Location
    United States
    Posts
    7
    Rep Power
    0

    apprentice info please

    thanks guys i will definatley step up the cardio and will look into the diets here.

  3. #3
    Royal_encrypter's Avatar
    Royal_encrypter Guest

    Re: apprentice info please!!

    I take it you enjoy being covered in Red diesel and oil and crud then?

    If i was yourself, i would consider going into commercial refrigeration. The transport sector is an ok industry. I found alot of people in the industry are very sneaky/two faced. I would recommend you pick a company with a dealership ideally with Carrier or Thermo king- that way you will get product training and build up knowledge of the most common units. Best of luck!!!

Similar Threads

  1. DORIN Comporessor Info Needed
    By MikeySq in forum Commercial
    Replies: 6
    Last Post: 17-11-2009, 11:25 AM
  2. Daikin info required
    By airconadam in forum Air Conditioning
    Replies: 5
    Last Post: 05-01-2009, 09:26 PM
  3. York ycaj Danfoss EKS65 phtq info
    By tomireland in forum Trouble Shooting
    Replies: 13
    Last Post: 22-12-2008, 06:47 PM
  4. Need Info on C-R170H5B compressor
    By Raadster in forum Air Conditioning
    Replies: 3
    Last Post: 08-07-2008, 03:56 AM
  5. Need info on the shaft seal system for scotsman
    By The MG Pony in forum Commercial
    Replies: 4
    Last Post: 17-03-2008, 02:02 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •