Results 1 to 8 of 8
Thread: r410a bottle orafice size?
-
04-09-2009, 04:43 AM #1
r410a bottle orafice size?
Has the orifice size been changed in the recent years on disposable bottles. I tried to connect my manifold to the bottle and the hose fits but will not bottom out and leaks at the bottle? Any info would be great.
-
05-09-2009, 12:02 AM #2
Re: r410a bottle orafice size?
Is the hose seal still in good condition?
Brian - Newton Abbot, Devon, UK
Retired March 2015
-
06-09-2009, 04:55 AM #3
-
06-09-2009, 07:25 PM #4
Re: r410a bottle orafice size?
ARe you using an acme gauge set, or it the cylider fitted with an acme outlet?
Do you guys over there use 1/4" or 5/16" for R410a?
1/4" was the standard for all refrigerant bottles, access points and hoses up until R410a for us, R410 is a 5/16" fitting and gauge hose set.
-
17-09-2009, 06:53 AM #5
-
17-09-2009, 03:03 PM #6
Re: r410a bottle orafice size?
-
18-09-2009, 12:01 AM #7
-
18-09-2009, 01:07 AM #8
Similar Threads
-
Pipes to large for R410a??
By Spanglishsparky in forum Technical SpeculationsReplies: 6Last Post: 09-05-2009, 12:57 AM -
Fujitsu Window unit Size 9 same size as 6 ?
By S_Line in forum Air ConditioningReplies: 1Last Post: 19-09-2008, 01:05 PM -
Pressure Testing for R410a
By Pooh in forum Tools and CalculatorsReplies: 33Last Post: 13-08-2008, 11:41 PM -
R410A captube sizing for 2.5 bar / 35 psi pressure drop
By DaBit in forum Technical SpeculationsReplies: 10Last Post: 27-11-2003, 09:05 AM