Results 1 to 3 of 3
Thread: invensys ech 420 controller
-
02-09-2009, 08:20 PM #1
invensys ech 420 controller
I've been working on 4 York Chillers today YCLC 302 ELN and they each have an Invensys ECH420 controller.
3 of the controllers were lit up with E100 and the other one was showing a fault code something like E142.
I've looked for a manual online showing how to use the controller and what the codes mean but i can't find the correct one.
Can anyone help?
The difference between genius and stupidity is that genius has its limits.
Marc
-
03-09-2009, 11:11 AM #2
- Join Date
- Sep 2007
- Location
- Split Croatia
- Age
- 57
- Posts
- 6,151
- Blog Entries
- 6
- Rep Power
- 36
Re: invensys ech 420 controller
From what I see from picture these Eliwell ECH420 are actually rebadged Microtech Energy 420.
Check this post:
http://www.refrigeration-engineer.co...14&postcount=2
E00 is remote OFF
E42 is faulty probe ST4Last edited by nike123; 03-09-2009 at 11:49 AM.
-
03-09-2009, 07:21 PM #3
Re: invensys ech 420 controller
Good stuff, thanks Nike123.
I must spread reputation around before giving it to you again...sorryThe difference between genius and stupidity is that genius has its limits.
Marc
Similar Threads
-
Carrier Transicold Container Problem
By Shamel in forum TransportReplies: 39Last Post: 23-01-2012, 11:23 PM -
Daikin controller
By mchild in forum Air ConditioningReplies: 8Last Post: 02-10-2009, 07:14 PM -
Daikin Controller
By mchild in forum Air ConditioningReplies: 11Last Post: 24-11-2008, 02:34 AM -
Controller wiring
By Mickvee in forum Air ConditioningReplies: 2Last Post: 30-12-2005, 02:04 AM -
Fan Controller
By Abe in forum Trouble ShootingReplies: 4Last Post: 12-01-2002, 02:21 AM