Results 1 to 4 of 4
-
31-08-2009, 05:28 AM #1
Sabroe Chill PAC reciprocating NH3 inlet valve failure
I have been working on a Sabroe Chill PAC reciprocating compressor model SMC108L with water cooled condenser. running conditions are - 4 C evaporating / + 40 C condensing. Chilling 12.4% (by weight) ethylene glycol solution from + 2.5 C to - 0.5 C.
The machine has contant problems with the inlet valve failing. Has anyone else experienced this problem?
What was the cause and the solution to the problem?
Thanks
Oz Fridgey
-
31-08-2009, 09:52 AM #2
Re: Sabroe Chill PAC reciprocating NH3 inlet valve failure
[quote=Oz Fridgey;
The machine has contant problems with the inlet valve failing.
Can u elaborate around the tipe valve?
-
31-08-2009, 09:52 AM #3
Re: Sabroe Chill PAC reciprocating NH3 inlet valve failure
What do you mean by inlet valve ?
Suction stop valve
or cylinder liner suction valve plate .
What refrigerant and comp speed ?
What type of evaporator and level control ?
-
31-08-2009, 10:10 AM #4
Re: Sabroe Chill PAC reciprocating NH3 inlet valve failure
what do you mean by inlet valve? inlet valve plate assembly? failing in which way? is you loading mech. working correctly?
Similar Threads
-
Carrier Transicold Container Problem
By Shamel in forum TransportReplies: 39Last Post: 23-01-2012, 11:23 PM -
LEV does not open
By Yuri B. in forum Air ConditioningReplies: 7Last Post: 19-07-2009, 02:37 PM -
Valve Reed of Reciprocating Compressors
By Samarjit Sen in forum Industrial CompressorsReplies: 38Last Post: 18-03-2008, 02:26 AM -
Scotsman commercial H2O inlet valve
By fullcourt in forum Trouble ShootingReplies: 9Last Post: 25-04-2006, 11:41 PM -
valve plate failure
By Andy noblet in forum Trouble ShootingReplies: 6Last Post: 04-06-2004, 08:54 PM