Results 1 to 8 of 8
Thread: Trane Filters
-
22-09-2004, 08:17 PM #1
Trane Filters
I need to supply quantity 12 x filters for a Trane Voyager unit, also size 2 foot x 1 foot filters for another
Would appreciate a contact where I can obtain these from in the UK.
Abe
Any opinions, statements and facts expressed in this message do not constitute legal advice in any shape or form and is given for a general outlook in nature. You are advised to seek appropriate and specific professional assistance from a regulated and authorised advisor for definitive advice.
-
22-09-2004, 08:31 PM #2
Re: Trane Filters
i use
nationwide at-
http://www.fengroup.com/
or
Filter Express
PO Box 48
Swansea
SA1 8YG (Road Map)
West Glamorgan
Tel: 01792 700123
Fax: 01792 793755
Internet: www.filterexpress.co.uk
Proprietor - Robert Ace
cheers
richard
-
22-09-2004, 08:34 PM #3
Re: Trane Filters
Thanks Richard, I appreciate your help
AbeAny opinions, statements and facts expressed in this message do not constitute legal advice in any shape or form and is given for a general outlook in nature. You are advised to seek appropriate and specific professional assistance from a regulated and authorised advisor for definitive advice.
-
22-09-2004, 10:00 PM #4
Re: Trane Filters
I think we use Nationwide too. As a matter of interest, what size is the Voyager? Some of the larger units have sliding filter trays, which makes life easier. Watch out if they're the 1" ones for the small units, however! ;-)
-
27-09-2004, 05:56 AM #5
Re: Trane Filters
Aiyub
We use a company called Midland Filtration, There based in nottingham and will probably deliver to your area.
Tel No 0115 9820676
-
29-09-2004, 11:25 PM #6
Re: Trane Filters
Jasper
Called Midland Filtration today, very helpful, all stock on shelf, reasonably priced and will deliver to me without charge in next few days!!
Thanks
AbeAny opinions, statements and facts expressed in this message do not constitute legal advice in any shape or form and is given for a general outlook in nature. You are advised to seek appropriate and specific professional assistance from a regulated and authorised advisor for definitive advice.
-
29-09-2004, 11:28 PM #7
Re: Trane Filters
Originally Posted by FreezerGeezer
The filter is 20 " x 24" x 1" if thats any help.
They slide in from the side...........Any opinions, statements and facts expressed in this message do not constitute legal advice in any shape or form and is given for a general outlook in nature. You are advised to seek appropriate and specific professional assistance from a regulated and authorised advisor for definitive advice.
-
30-09-2004, 08:40 AM #8
Re: Trane Filters
Hello Aiyub
Trane Voyagers below a size 080 take 20x16x1" filters. The rest take various sizes of 2" thick filters as far as I know. If your unit is bigger than a 075, I'd suggest that you want 2" filters rather than 1"?
If it's a 060, 073 or 075, I'd suggest that you try to pry the end of the runners open a bit, as that helps a lot with getting the filters in without damaging them. I also found that the filters on any voyager (but especially the small ones) get caught on projecting screw heads & suchlike. I found the easiest thing was to switch off the unit, and have my filter puller ready if I needed to reach in & tweak the filters around.
Similar Threads
-
Trane RTAD125 Problems
By Latte in forum Trouble ShootingReplies: 10Last Post: 10-05-2010, 11:38 AM -
Are Trane Expensive
By frank in forum Air ConditioningReplies: 17Last Post: 20-05-2009, 01:55 PM -
Trane Screw comps
By Rob S in forum CommercialReplies: 8Last Post: 21-07-2006, 01:06 PM -
Sabroe oil filters..grumble, grumble, grumble...
By SteveDixey in forum Industrial CompressorsReplies: 3Last Post: 25-12-2005, 07:49 PM -
Trane CROE1
By Peter_1 in forum IndustrialReplies: 10Last Post: 06-03-2004, 07:42 PM