Results 1 to 4 of 4
Thread: TEV's Hissing but no cold
-
20-08-2009, 05:10 PM #1
TEV's Hissing but no cold
Ok, so I went to this freezer on a boat, had 3 holding plates piped in series with 1 TEV trying to do all 3 with R22. The system was not freezing and had been heavily over gassed. I reduced the gassing down to a sensible level and managed to get two of the plates freezing. The owner wanted all 3 plates freezing so I changed the pipework so 2 plates were in series and the third in parallel with its own TEV. vac'd it down gassed it up, switched it on got a lovely hissing but no cold.... I am now officialy stuck.
Can anyone tell me what I may have done wrong?
-
20-08-2009, 06:41 PM #2
Re: TEV's Hissing but no cold
-
20-08-2009, 09:26 PM #3
Re: TEV's Hissing but no cold
2 plates in serial and one in parallel.. where you then connected the bulb?
What about the very unequal unbalance you have now?
What's your SH and evaporating temperature?
Why you changed it (3 plates in serial with each other)
It's the hissing that botters me.It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.
-
21-08-2009, 08:14 PM #4
Re: TEV's Hissing but no cold
hi
how did u dtermine the sensible level
with lack of info no body can help
u mention nothing about ur suction temp&pressure condensing temp&pressure subcooling superheat
maybe the excessive gas has damage compressor valves so please more info more help
Similar Threads
-
Zanussi ZENB9950 Freezer cold fridge not
By fkarim7 in forum DomesticReplies: 3Last Post: 03-09-2009, 09:10 PM -
Blind Cold room specs help
By frostedflake in forum Trouble ShootingReplies: 5Last Post: 13-03-2009, 01:49 AM -
cold river water
By eftimios in forum FundamentalsReplies: 8Last Post: 09-11-2008, 06:37 PM -
expansion valve aint cold
By justinworne in forum Trouble ShootingReplies: 6Last Post: 26-07-2006, 10:52 PM -
Installation of cold room
By Josip in forum Legal-Business-MarketingReplies: 12Last Post: 12-03-2006, 09:20 PM