Results 1 to 5 of 5
Thread: Lossnay
-
11-08-2009, 06:57 PM #1
Lossnay
I have an enquiry from a customer, any advice would be much appreciated. They have a individual Lossnay unit on a Mitsubishi PZ-412SLB-E controller. they would like to have timer control. I don't have the model number of Lossnay as of yet. Question: What is the best way? Can I use a PAR21 even though there is no A/C?
-
11-08-2009, 08:17 PM #2
Re: Lossnay
Not sure about that.
Never seen anyone use a PAR21 to control a stand alone Lossnay.
But I suspect that it would work ok
The lossnay does have a 12v dc terminal for remote controller.
-
11-08-2009, 08:29 PM #3
Re: Lossnay
Not sure now as I've been away from Mitsi for a long time but I'm sure we used a PAR20 with a Lossnay unit at some point to get us out of the brown stuff.
-
11-08-2009, 11:13 PM #4
Re: Lossnay
Would a simple time clock fit into the scheme somewhere?
Brian - Newton Abbot, Devon, UK
Retired March 2015
-
17-08-2009, 07:46 PM #5
Re: Lossnay
Thanks for the info. The first Mitsubishi tech suggested the same as yourself Brian but after a little more info we found that there is a stand alone Lossnay control with 7 day timer. Model no: PZ-60DR-E. Fitted today and has done the job! Thanks again.
Similar Threads
-
Lossnay Heat Exchanger manual
By Judy in forum New to REReplies: 2Last Post: 14-05-2009, 03:05 PM -
High humidity comfort cooling
By Thermatech in forum Air ConditioningReplies: 70Last Post: 27-11-2008, 01:01 AM -
Mitsi Lossnay Heat Exchanger
By sinewave in forum Air ConditioningReplies: 9Last Post: 05-02-2008, 05:55 PM