Results 1 to 4 of 4
Thread: Service valves
-
11-08-2009, 06:04 PM #1
Service valves
Hi
Does anyone know out there where I can source a few of these type valves from ?
It uses the standard 1/4 inch flare screw on charge hose fitment and brazes onto 1/4 inch copper pipe.
Need a few to finnish my refrigeration cooled PC
Thanks
-
11-08-2009, 07:29 PM #2
Re: Service valves
I call them 1/4" schrader valve stubs. They are an off the shelf item at any refrigeration supplier in the country:
Climate Centre
HRP
Dean & Wood
to name a few.
-
11-08-2009, 08:00 PM #3
Re: Service valves
Paul
"KEEP IT COOL"
-
11-08-2009, 10:06 PM #4
Re: Service valves
Hi
Thanks for the info it’s greatly appreciated, will have a look at those online now.
For the life of me I could not find them on the internet, used various keywords from air conditioning service valve to brass refrigerant charge valve and nothing but the brass plumbing type came up, did find a company who make the 2 found on split system condenser units, that’s as far as I got.
The one I have came from our old Candy fridge freezer that went down tip after the old dear decided to defrost the freezer part with a knife & fork then hisssssssssss, oh buxxer !
Thanks again
airconlad
Similar Threads
-
Front seating service valves
By WaterholeWally in forum Technical SpeculationsReplies: 1Last Post: 12-07-2009, 09:36 PM -
Service Procedures For TK Scroll
By absolute-zero in forum TransportReplies: 0Last Post: 03-02-2008, 07:42 PM -
SL/SB-400 Pump Down Procedures
By absolute-zero in forum TransportReplies: 1Last Post: 29-01-2008, 09:27 PM -
dan foss tx valves
By fuzzy in forum Trouble ShootingReplies: 7Last Post: 02-10-2007, 01:11 PM -
Problem with Tango: no service valves !!
By momo in forum Air ConditioningReplies: 5Last Post: 21-08-2007, 11:45 PM