Results 1 to 4 of 4
Thread: Pressure transducers
-
08-08-2009, 08:22 PM #1
Pressure transducers
Hi all,
Been looking for a reasonably priced pressure transducer to work into a standard R134A unit for monitoring purpose.
Found the AKS series form Danfoss, the CPC from Emerson, The K1 from Ashcroft, and a few more.
The problem is they all seem to cost an arm and a leg (over 120$ for a small quantity order), would anybody know of anything more reasonably priced?
Thanks,
Amir
-
10-08-2009, 04:11 AM #2
Re: Pressure transducers
typical of this trade is that everything comes at an extravagant cost.
prepare to lose an arm and a legmmm to beer or not to beer...........lets drink breakfast
-
14-08-2009, 06:38 PM #3
Re: Pressure transducers
To save the last arm and leg, use the stuff that has proved themselves.
Danfoss, Alco and Carel are some of them.
Never tried the "cheepies"I am not always right, but I'm never wrong!
-
18-08-2009, 03:47 PM #4
Re: Pressure transducers
Ya.. can try CAREL! It is as reliable as Danfoss and Alco
Similar Threads
-
Capillary Tube Characteristics
By Chef in forum FundamentalsReplies: 9Last Post: 10-03-2009, 01:03 PM -
Compressor loading, cooling, and range of operation.
By Air duster in forum FundamentalsReplies: 10Last Post: 02-04-2008, 08:39 AM -
Benji
By benji in forum Trouble ShootingReplies: 29Last Post: 30-01-2008, 01:25 PM -
Building a wine cabinet
By Rory in forum Technical DiscussionsReplies: 38Last Post: 13-07-2004, 08:28 PM