Results 1 to 19 of 19
Thread: Lets do a Frick forum!
-
29-07-2009, 08:59 AM #1
Lets do a Frick forum!
We can cover all ranges of compressor's, Quantum LX's Quantum 4's Vyper drives or any other VSD that you can put on screw compressors.
-
29-07-2009, 05:55 PM #2
Re: Lets do a Frick forum!
I personally am not a fan of specific manufacturers forums. It is better to keep it open. You can always start a Specific thread for a model in question.
Ken
-
29-07-2009, 07:20 PM #3
Re: Lets do a Frick forum!
Sorry Frickman.
But I agree with the Iceman.
It's not advantageous for anyone to show allegiance to any manufacturer!
But that does not mean that your specific advise would not be welcomed.
It would, like any of the many "specialists" that help us all.
What I rather crudely am trying to say is!
We all benefit from each others knowledge and experience.
But if we were to take sides it would ruin a brilliant forum.
Hope to here from you often.
Grizzly
-
30-07-2009, 03:17 AM #4
Re: Lets do a Frick forum!
So there go Frickman, back in your cage.
But I do quite like Frick compressors, built like brick out-house. Some of the earlier control panels were seriously low tech and a head ache.
-
30-07-2009, 10:15 PM #5
Re: Lets do a Frick forum!
I was just sugesting that come here for your problems for frick compressors thats it. I agree that you should keep it open and not favor manufacturer.
-
31-07-2009, 05:39 PM #6
-
03-08-2009, 12:16 PM #7
Re: Lets do a Frick forum!
Hi, Frickman
agree with Grizzly... you're our man, now we know where to come if need something ....
Best regards, Josip
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.
-
03-08-2009, 06:28 PM #8
Re: Lets do a Frick forum!
I used to be a big Frick fan, but that has changed drastically over the last 10 years, all compressors have their good points and bad points, find me a good operator and isnt doesnt matter what type equipment you run, the operator is the key.
-
03-08-2009, 09:17 PM #9
-
04-08-2009, 03:48 AM #10
Re: Lets do a Frick forum!
That is true
-
05-08-2009, 12:51 AM #11
Re: Lets do a Frick forum!
Originally Posted by Frickman
Separate threads started by someone sometimes ask for literature, etc. In that regard you could be an asset to them. Or, if you have general questions then please post them and someone different may be able to help you.
The forums will not be turned into an advertising display for any manufacturer. No one else is extended this luxury either. So that's fair for everyone.If all else fails, ask for help.
-
12-08-2009, 05:29 PM #12
Re: Lets do a Frick forum!
It will be a wonderful idea for me, because I deal with Frick product everyday.
so, why not!
-
13-08-2009, 07:15 PM #13
-
15-08-2009, 06:59 AM #14
Re: Lets do a Frick forum!
Could we call it Fricks I have known.
-
16-08-2009, 01:55 PM #15
Re: Lets do a Frick forum!
New to this.. My problem is with a Frick compressor..what would cause the compressor to freeze up when loaded..
-
16-08-2009, 02:02 PM #16
-
16-08-2009, 02:44 PM #17
- Join Date
- Sep 2007
- Location
- Split Croatia
- Age
- 57
- Posts
- 6,175
- Blog Entries
- 6
- Rep Power
- 36
Re: Lets do a Frick forum!
Part of compressor casing temperature lower than 0°C. That doesn't necessary mean that there is problem.
What is evaporation temperature and what is suction superheat?
And please, post your question in appropriate section.
This has nothing to do with "Do you have a suggestion for the RE Forums?".
-
20-08-2009, 08:20 PM #18
-
23-03-2010, 10:43 PM #19
Lets do a Frick forum
I think this forum isnt anywhere near as fun now. I mean, we can no longer use it to bash the mods and heckle the administrators.This forum is now lame.Lets bring back the old style one please? :-/
Similar Threads
-
problem with volume on frick screw compressor
By samlee12 in forum IndustrialReplies: 4Last Post: 29-10-2009, 07:06 AM -
problem with frick screw volume
By samlee12 in forum Industrial CompressorsReplies: 9Last Post: 20-06-2009, 02:46 PM -
This forum is growing up,but...
By sagittarius in forum Chit Chat & Service StoriesReplies: 1Last Post: 08-09-2008, 07:18 AM -
Ammonia Circulation rate - by Frick/ Vitler
By smpsmp45 in forum NH3Replies: 12Last Post: 16-06-2008, 10:06 AM -
How many forum posters does it take to change a light bulb....
By taz24 in forum Chit Chat & Service StoriesReplies: 7Last Post: 04-02-2008, 08:05 AM