Results 1 to 19 of 19
  1. #1
    Join Date
    Jul 2009
    Location
    arkansas
    Age
    36
    Posts
    21
    Rep Power
    0

    Question Lets do a Frick forum!



    We can cover all ranges of compressor's, Quantum LX's Quantum 4's Vyper drives or any other VSD that you can put on screw compressors.



  2. #2
    Join Date
    Mar 2005
    Location
    USA
    Age
    70
    Posts
    639
    Rep Power
    13

    Re: Lets do a Frick forum!

    I personally am not a fan of specific manufacturers forums. It is better to keep it open. You can always start a Specific thread for a model in question.

    Ken

  3. #3
    Join Date
    Sep 2007
    Location
    Somerset
    Age
    63
    Posts
    4,465
    Rep Power
    38

    Re: Lets do a Frick forum!

    Quote Originally Posted by TXiceman View Post
    I personally am not a fan of specific manufacturers forums. It is better to keep it open. You can always start a Specific thread for a model in question.

    Ken
    Sorry Frickman.
    But I agree with the Iceman.
    It's not advantageous for anyone to show allegiance to any manufacturer!

    But that does not mean that your specific advise would not be welcomed.
    It would, like any of the many "specialists" that help us all.
    What I rather crudely am trying to say is!
    We all benefit from each others knowledge and experience.
    But if we were to take sides it would ruin a brilliant forum.
    Hope to here from you often.
    Grizzly

  4. #4
    Join Date
    May 2007
    Location
    Auckland
    Age
    67
    Posts
    3,362
    Rep Power
    31

    Re: Lets do a Frick forum!

    So there go Frickman, back in your cage.
    But I do quite like Frick compressors, built like brick out-house. Some of the earlier control panels were seriously low tech and a head ache.

  5. #5
    Join Date
    Jul 2009
    Location
    arkansas
    Age
    36
    Posts
    21
    Rep Power
    0

    Re: Lets do a Frick forum!

    I was just sugesting that come here for your problems for frick compressors thats it. I agree that you should keep it open and not favor manufacturer.

  6. #6
    Join Date
    Sep 2007
    Location
    Somerset
    Age
    63
    Posts
    4,465
    Rep Power
    38

    Re: Lets do a Frick forum!

    Quote Originally Posted by Frickman View Post
    I was just sugesting that come here for your problems for frick compressors thats it. I agree that you should keep it open and not favor manufacturer.
    Good Man!
    I will know where to come in future.
    Thanks Grizzly.

  7. #7
    Join Date
    Jan 2006
    Location
    Croatia
    Age
    62
    Posts
    2,116
    Rep Power
    23

    Re: Lets do a Frick forum!

    Hi, Frickman

    agree with Grizzly... you're our man, now we know where to come if need something ....

    Best regards, Josip

    It's impossible to make anything foolproof because fools are so ingenious...

    Don't ever underestimate the power of stupid people when they are in large groups.

    Please, don't teach me how to be stupid....
    No job is as important as to jeopardize the safety of you or those that you work with.

  8. #8
    Join Date
    Jan 2006
    Location
    Valrico, Florida
    Posts
    517
    Rep Power
    12

    Re: Lets do a Frick forum!

    I used to be a big Frick fan, but that has changed drastically over the last 10 years, all compressors have their good points and bad points, find me a good operator and isnt doesnt matter what type equipment you run, the operator is the key.

  9. #9
    Join Date
    Sep 2007
    Location
    Somerset
    Age
    63
    Posts
    4,465
    Rep Power
    38

    Re: Lets do a Frick forum!

    Quote Originally Posted by nh3wizard View Post
    I used to be a big Frick fan, but that has changed drastically over the last 10 years, all compressors have their good points and bad points, find me a good operator and isnt doesnt matter what type equipment you run, the operator is the key.
    Wise words yet again!
    Grizzly

  10. #10
    Join Date
    Jul 2009
    Location
    arkansas
    Age
    36
    Posts
    21
    Rep Power
    0

    Re: Lets do a Frick forum!

    That is true

  11. #11
    Join Date
    Aug 2005
    Location
    USA
    Posts
    5,330
    Rep Power
    19

    Re: Lets do a Frick forum!

    Quote Originally Posted by Frickman
    We can cover all ranges of compressor's, Quantum LX's Quantum 4's Vyper drives or any other VSD that you can put on screw compressors.
    Nope.

    Separate threads started by someone sometimes ask for literature, etc. In that regard you could be an asset to them. Or, if you have general questions then please post them and someone different may be able to help you.

    The forums will not be turned into an advertising display for any manufacturer. No one else is extended this luxury either. So that's fair for everyone.
    If all else fails, ask for help.


  12. #12
    Join Date
    Jun 2007
    Location
    Vietnam
    Posts
    70
    Rep Power
    11

    Re: Lets do a Frick forum!

    It will be a wonderful idea for me, because I deal with Frick product everyday.
    so, why not!

  13. #13
    Join Date
    Jan 2006
    Location
    Valrico, Florida
    Posts
    517
    Rep Power
    12

    Re: Lets do a Frick forum!

    Quote Originally Posted by Tung View Post
    It will be a wonderful idea for me, because I deal with Frick product everyday.
    so, why not!
    Never mind, I had something negative to say but Ill leave it alone...

  14. #14
    Join Date
    Jul 2006
    Location
    New Zealand
    Age
    70
    Posts
    66
    Rep Power
    12

    Re: Lets do a Frick forum!

    Could we call it Fricks I have known.

  15. #15
    oubruiser's Avatar
    oubruiser Guest

    Re: Lets do a Frick forum!

    New to this.. My problem is with a Frick compressor..what would cause the compressor to freeze up when loaded..

  16. #16
    Join Date
    Sep 2007
    Location
    Somerset
    Age
    63
    Posts
    4,465
    Rep Power
    38

    Re: Lets do a Frick forum!

    Quote Originally Posted by oubruiser View Post
    New to this.. My problem is with a Frick compressor..what would cause the compressor to freeze up when loaded..

    Welcome oubruiser.
    We generally like a bit more info!
    As a first un-informed guess, how about liquid flood-back?
    Grizzly

  17. #17
    Join Date
    Sep 2007
    Location
    Split Croatia
    Age
    51
    Posts
    6,075
    Blog Entries
    6
    Rep Power
    30

    Re: Lets do a Frick forum!

    Quote Originally Posted by oubruiser View Post
    New to this.. My problem is with a Frick compressor..what would cause the compressor to freeze up when loaded..
    Part of compressor casing temperature lower than 0C. That doesn't necessary mean that there is problem.
    What is evaporation temperature and what is suction superheat?
    And please, post your question in appropriate section.
    This has nothing to do with "Do you have a suggestion for the RE Forums?".
    Now, when I am officialy citizen off EU, I am looking for decent job! For any job offer please check my profile!

  18. #18
    Join Date
    Oct 2006
    Location
    Us
    Age
    44
    Posts
    8
    Rep Power
    0

    Re: Lets do a Frick forum!

    Quote Originally Posted by nh3wizard View Post
    Never mind, I had something negative to say but Ill leave it alone...
    Take it that you are not high on the Frick.

  19. #19
    Tymmegreereiz's Avatar
    Tymmegreereiz Guest

    Lets do a Frick forum

    I think this forum isnt anywhere near as fun now. I mean, we can no longer use it to bash the mods and heckle the administrators.This forum is now lame.Lets bring back the old style one please? :-/

Similar Threads

  1. problem with volume on frick screw compressor
    By samlee12 in forum Industrial
    Replies: 4
    Last Post: 29-10-2009, 06:06 AM
  2. problem with frick screw volume
    By samlee12 in forum Industrial Compressors
    Replies: 9
    Last Post: 20-06-2009, 02:46 PM
  3. This forum is growing up,but...
    By sagittarius in forum Chit Chat & Service Stories
    Replies: 1
    Last Post: 08-09-2008, 07:18 AM
  4. Replies: 12
    Last Post: 16-06-2008, 10:06 AM
  5. How many forum posters does it take to change a light bulb....
    By taz24 in forum Chit Chat & Service Stories
    Replies: 7
    Last Post: 04-02-2008, 07:05 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •