Results 1 to 2 of 2
Thread: Heat Leakage Problem.
-
15-07-2009, 02:59 PM #1
Heat Leakage Problem.
We are testing a freezer with DKM 75 Compressor
We had insulated with Nitryle Rubber Insualtion 40 mm thick , having conductivity 0.030 w /m2 k with 19 mm.The surface area is 5m2
We didnt geting th temperature woth heat load of 700 kcal/hr .
Refrigerant R22.
Temperature of freezer -10 Deg C
Outside Ambient 30 Deg C
Please guide on this .
-
15-07-2009, 10:25 PM #2
Re: Heat Leakage Problem.
Please guide on thisBrian - Newton Abbot, Devon, UK
Retired March 2015
Similar Threads
-
Capacity control
By sparrow in forum TrainingReplies: 44Last Post: 18-01-2010, 07:49 PM -
Heat pump problem
By Darc in forum Trouble ShootingReplies: 5Last Post: 23-08-2008, 10:21 AM -
A Five-Year Administration's Solution to a Hundred-Year Problem.
By Argus in forum Heat PumpsReplies: 4Last Post: 01-07-2008, 10:34 PM -
Heat Reclaim
By chilled2005 in forum Supermarket RefrigerationReplies: 19Last Post: 05-05-2008, 05:32 PM -
R134a <-> liquid heat exchanger design
By DaBit in forum Technical SpeculationsReplies: 19Last Post: 10-05-2002, 08:36 AM