Results 1 to 1 of 1
Thread: Help with small Heat Exchanger
-
15-07-2009, 02:16 PM #1
Help with small Heat Exchanger
Hi all, Im new to refirgeration cycles and have to build one for work.
I am using an Aspen 1.4 cc compressor running at 6000 RPM using R134a with a total heat rejection of 425 W. I am having difficulties finding a condenser and evaporator small enough for my system. Any recommendations???
I also need to size capillary tubes for this as well. I have read that Danfoss has a program. Is the program translatable to other compressor systems?
Similar Threads
-
Some information on the aplication of suction gas/liquid line heat exchangers
By SteinarN in forum FundamentalsReplies: 5Last Post: 14-09-2009, 07:33 AM -
Heat Exchanger Thermal Effectiveness
By wilsonudevil in forum Air ConditioningReplies: 1Last Post: 20-11-2008, 01:10 PM -
frostles heat pump
By Lc_shi in forum New TechnologiesReplies: 27Last Post: 31-03-2008, 07:53 AM -
heat exchanger for small chiller
By star882 in forum FundamentalsReplies: 4Last Post: 30-01-2007, 12:06 PM -
R134a <-> liquid heat exchanger design
By DaBit in forum Technical SpeculationsReplies: 19Last Post: 10-05-2002, 08:36 AM